Model #1533 JENSEN Speakers

  • No Image Available
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacing glass JVM1533WD002 Ge Microwave

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when having trouble with the microwave.
 
Glad to help out.   Im  looking at your GE Microwave model number JVM1533WD002.


Thank you for contacting SearsPartsDirect.com with your questions about your GE Microwave. I am so sorry to hear it has problems on having to replace the door. I know what a time saver the microwave is and know you want to get it working again quickly. In this case, I suggest you have it tested and repaired by a qualified technician.
 
We do not give advice on repairing microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is unplugged from the outlet. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after any microwave service.
 
 
 
For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME (1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project.
 

Read More
Larry L -
Sears Technician
March 26, 2014
Q:

Need cubic feet of Sears Coldspot FReezer 15

A:

Thank you for choosing ManageMyLife.com. I understand how important it is to know the size of your freezer, especially once it comes time to replace the unit. However, without a model number, I am unable to research the freezer specifications. The 15 could mean the cubic capacity but I am not sure. I have included instructions below on how to measure the unit for capacity.

1. Remove everything from the refrigerator to be able to get the most accurate measurements.

2. Measure the width, right to left. Make sure to keep the tape level, then write the number down.

3. Measure the height by using one of the front edges to keep the tape plumb, then write the number down.

4. Measure the depth from top inside corner to front edge. Write the number down.

5. Multiply the height times the width times the depth. (i.e. 46 height x 32 width x 18 depth = 26,496 cubic inches.

6. Divide the total by 1,728 -- the number of cubic inches in a cubic foot -- to determine the volume of your refrigerator in cubic feet. (i.e. based on calculation above, 26,496 / 1,728 = 15.33 cubic feet)

If you would like more assistance, reply to this thread and I will be glad to assist you further. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
October 02, 2013
Q:

How many cubic feet is my Kenmore refrigerator model 3639751510?

A:

Thank you for choosing ManageMyLife.com. I understand how important it is to have the capacity of your refrigerator, especially when it comes time to replace the unit. I was unable to find any model specifications for this unit. However, I have included instructions below on how to measure your refrigerator for cubic capacity.
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

1. Remove everything from the refrigerator to be able to get the most accurate measurements.

2. Measure the width, right to left. Make sure to keep the tape level, then write the number down.

3. Measure the height by using one of the front edges to keep the tape plumb, then write the number down.

4. Measure the depth from top inside corner to front edge. Write the number down.

5. Multiply the height times the width times the depth. (i.e. 46 height x 32 width x 18 depth = 26,496 cubic inches.

6. Divide the total by 1,728 -- the number of cubic inches in a cubic foot -- to determine the volume of your refrigerator in cubic feet. (i.e. based on calculation above, 26,496 / 1,728 = 15.33 cubic feet)

I hope we can help you with any other questions and repairs in the future. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
September 12, 2013