Model #14116655900 KENMORE ELITE Grill, Gas

  • Grill
    3 Results
  • Rotisserie Assembly
    3 Results
  • Hardware For Rotisserie
    3 Results
Find part by diagram >

Question and Answers

Q:

Is there a natural gas conversion kit available for my grill?

A:

I know how important it is to have the correct kit for your grill to make sure it will fit. I did some research and I was able to find two sites in where you can order parts. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
June 25, 2012
A:

Thank you for submitting your question. It know it's frustrating when a part is no longer available. There are no replacement kits or individual parts listed for the natural gas conversion for you grill. I've searched other parts sites and resources and have found nothing for this kit. Thank you for choosing Manage My Life.

Read More
Tykara -
Sears Technician
June 28, 2012
See more answers
Q:

can a grill be installed in a serving cart module

A:

I know this type of information towards your Grill can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
February 06, 2012
A:

Thank you for your question on the grill table.

The model of grill that went with these modules is 141.16655900.

This grill is not a current model.

There are a number of units for this outdoor kitchen.

I do not have any dimension insert sizes for the refrigerator.

I will give you all the model numbers for these unit modules below.

You will have to check with your local Sears retail store for prices and availability of these units.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
February 08, 2012
See more answers
Q:

Kenmore LP Gas Grill Model 141.16655900

A:

We have received your question, Please allow 24 to 48 hours for an expert to answer your question.

Read More
Salina L -
August 11, 2010
A:

There are no replacement kits or individual parts listed at this time for the kit. The manufacturers determine what parts/kits will be available and for how long. I don’t the theory to their reasoning on stopping production of some parts. You mentioned about having to be able to get parts for the kit in case one were to break would seem to make sense initially. Upon further review I see that the parts in the kit are things that generally don’t wear out. They could become lost or damaged though. I just can’t see the reasoning behind having this part go out of production. I wish I had something better to tell you.

You may contact a local plumber to see if they might happen to have a kit or would be able to make one up. A lot of valves and orifices can be used on many brands/models of grills. So they should be able to assist you. Again, I wish I had better news for you.

Read More
Lyle W -
Sears Technician
August 11, 2010
A:

I understand what you are saying, but what I am trying to find out is what parts was in the kits and/or part numbers.

Read More
tmalone28787 -
August 11, 2010
A:

I contacted the manufacturer of your grill to see if there is anything else that can be done. Looking over the part research notes, I don't see anything other than the part is no longer available and that there is no part (numbers) listing of the kit. I just cannot fathom them having a model still being sold and there not be a way to get the kit for it. There has to be something we're missing. I will keep you updated on anything I hear. Sometimes a request like that may take a day or more but please don't think I'm blowing you off. I'm here to help you.

Read More
XX Wade_ -
Sears Technician
August 11, 2010
A:

I heard back from Grand Hall (manufacturer). They said: "Unfortunately the conversion kit for that model is no longer available from the manufacturer. They did not provide a substitute for that part either nor are there parts that we can send for it to work off natural gas. Everything that was needed for the grill to work on natural gas was provided in the kit. The only parts we have for that grill are the original propane parts. I do apologize for any inconvenience to the customer but we have no control over when the manufacturer stops producing parts." I'm really sorry there isn't anything more we can do for you on this. I will email you directly as well to make sure you get this information.

Read More
XX Wade_ -
Sears Technician
August 11, 2010
A:

I also recently purchased this same grill - at a close out price of $750 - and received basically the same response from both Sears and Grand Hall. The latter confirmed that this model was manufactured in 2009 so it's inconceivable that they would no longer make the conversion kit, especially when you consider the full retail price of the grill. I'm convinced that another Grand Hall kit would probably work but they could not give me any info. It may take escalating this to their manufacturing dept. to suggest an alternate part number although they may not be willing to do so for liability reasons. The only option may be finding a similar GH grill model (i.e. 5 burner), ordering the kit and hoping for best. It's either that or propane.

Read More
John -
September 29, 2010
A:

i have the same grill any luck on y0440037

Read More
john b -
June 14, 2011
A:

@JohnB, as it stands the conversion kit is still listed as "no longer available" with no substitute kit. That will very likely remain that way as they rarely go back and make something available. I wish I had better news but I'm afraid I don't.

Read More
XX Wade_ -
Sears Technician
June 14, 2011
See more answers

Top Parts