Model #14116221 KENMORE Grill, Gas

  • Gas Grill
    3 Results
Find part by diagram >

Question and Answers

Q:

parts quantity 141.16221

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
The flame tamers and burners on this grill are all being sold individually. So you will need to adjust your quantity on the website to three (3) each. If they were sold as a 3-pack, there would typically be a dotted box around the parts on the illustration, and would typically identify it as a 'kit' or '3-pack.' 
Hope this clarifies it and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 05, 2014
Q:

parts quantity 141.16221

A:

 
Thank you for choosing SearsPartsDirect. I can certainly assist you in locating the parts for your grill. I did look into the model number you have provided and I have found information to assist you. I did look into the parts you have mentioned and they are sold seperately. It may have a 3 next to the part, but that only means you need a quantity of 3. You will need to quantity to 3 to get 3 parts.
 You can always order on searspartsdirect.com. 

Let me know if you have another questions. 

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 05, 2014
Q:

Kenmore Gas Grill, ignition switch not working.

A:

Grilling is a great way to make your favorite meals. It can be frustrating that the ignition switch is not working. I did find some information for you that I am hoping will help you with the grill. I am adding the link below to help you with your question while you wait for your expert response. i do hope that this will help you with the grill.

Read More
Marc H -
June 04, 2012
A:

Thank you for your question on the Kenmore gas grill ignition system.

I am not sure that the spark module is the problem you are having.

I most cases the igniters near the burner are not grounding because of the rust build up.

I would suggest examining the wiring going to the module and the connection at the igniter box. The charge from the igniter has to go to ground and the distance from the tip of the igniter has to be not more than the thickness of a nickel.

The spark module where the battery goes should be all one piece and behind the button nut should be another nut to loosen to get the igniter module out of the console. The igniter has to come out from the back side of the console. Are you not able to remove it from that area? If so what is in the way.

Please let me know what you found out.

Please let me know

Sam A.

Read More
Sam A -
Sears Technician
June 06, 2012
See more answers

Top Parts