Model #141157941 KENMORE Grill, Gas

  • Gas Grill Assembly
    3 Results
Find part by diagram >

Question and Answers


do it yourself new parts installation


When it comes to replacing parts on the grill can be difficult. I have done some research on the Manage My Life website and have located a link similar to your issue. While you are waiting for a detailed rely from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
July 15, 2012

Thank you for your question on the position of the collector boxes.

The collector boxes should be open on each end and should be mount not more the 3/16 of and inch from the burner ports so fuel coming out of the burner can migrate into the side of the collector box and light the burner.

The collector box is there to capture the gas for lighting so if there is an up or down then it should be down. I thought that the collector boxes are open on either end.

The burners you have are correct but you will need to slide the old primary air shutters off the old burners and put them on the new burner.

The same is true of the hair pin burner retainer clips.

Use the old ones to secure the burners.

The only reason they are there is incase you decide to move the grill to a different location so they stay in place.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
July 18, 2012
See more answers

Top Parts