Model #1410 WARDS NPA Hedge Trimmer, Gas

  • No Parts Or Service Available
    3 Results
Find part by diagram >

Question and Answers

Q:

Motor replacement 137224120 Craftsman Band saw

A:

Thank you for choosing sears I would be happy to help you with your band saw. Upon researching model 137224120; the motor for this model has been discontinued and is no longer available, we do not have a substitution.

I trust that this information will help you, thank you have a great day.

Read More
CarlosZ -
Sears Technician
May 12, 2015
Q:

kenmore refrigerator model 795.58812.900 not take, stopped working, it does nothing, no lights

A:

The refrigerator not working properly can be an inconvenience and keep you from storing your fresh food. I am adding a link below to help you with your question while you wait for your expert response.

Read More
Joseph P. -
February 15, 2012
A:

Thank you for your question. I'm sorry you are having this problem with the fridge. The information you have received from Joseph is correct. I hope it will help you. The main board on this model is # 6871JB1410P. If you would like more assistance, reply to this thread and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
February 18, 2012
A:

I have the same model and now the same problem. Fridge will not work. Trying wotroubleshoot a fix insteadof calling a repair man. We have had this unit for just over 5 years. I do not see the link they are speaking of above. Please help! Thanks. Mike

Read More
Michael -
January 25, 2015
See more answers
Q:

LG Model # LSC27910TT no longer cools or freezes? LSC27910TT

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your refrigerator and I do understand your frustration. Glad to help out. I'm looking at your model number lsc27910tt and from the description, it sounds like the main board has failed. The main board # 6871JB1410N controls everything and if it fails, the unit goes dead. This board can be located either on top of the cabinet or behind it. Here is a link that may further help your troubleshooting. If you have a meter and know how to use it, I would begin testing the boards and verifying if they are receiving power or not. If you are unsure on testing the unit do not attempt. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 18, 2014
A:

Thank you, Sherman G: I've discovered a few things since I posed this question. I have good power to the unit. The front control panel responds, the cooling fan comes on, interior lights in both compartments as well as the circulating fans function. The overload protector/starter relay clicks on and off and seems to be okay (no rattling or odors). The compressor, however, gets warm to the touch so I'm pretty sure it's getting juice. Unfortunately, it doesn't start or run. The overload and relay, housed together in a small plastic box and plugged into the side of the compressor, apparently come packaged only with the compressor and can't be purchased separately. So, I'm thinking I have to replace the compressor. Your thoughts? Gary Hansen Denver, CO

Read More
Gary -
November 18, 2014
See more answers