Model #14001 NIKKO Radio/remote control toys

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

zipper foot install on 158.14001 158.14001

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your sewing machine and I do understand your frustration. Glad to help out. I'm looking at your model number 158.14001 and the service manual listed for this model does not include zipper foot installation, however here is a link for a video that will help with the installation. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 22, 2015
Q:

Reverse stiching lever broke off. Is it fixable? 15814001 Kenmore Sears sewing machine

A:

Thank You for choosing Sears PartsDirect.com. Glad to help out. Im looking at your model number 158.14001
and the part number for the lever is 30832. We no longer have the part available. You may try contacting the original manufacturer IMPULSE ITEMS. I tried looking information on the manufacturer but it seems like it may have been an overseas manufacturer. I hope this information helps with your repair.  If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
July 10, 2014
Q:

#158.14001 Stitch length control will no longer turn. 15814001 Kenmore Sears sewing machine

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your sewing machine and do understand your frustration. Glad to help out. Im looking at your model number 15814001 and this sounds like a case of long term non-use and the machine has locked from being dry.

I you remove the top off the machine and use some oil on everything that moves you may be able to free up the stuck parts.

I would suggest putting a few layers of newspaper under the machine then get as can of sewing machine oil and while you have the foot pedal down on the machine oil all the locations under the top that looks like it should move and I have found in time you will get those stuck parts to loosen up. As you run the machine move the top stitch back and forth as you oil and run the machine. I would also suggest first removing the top cover on the machine and then the side hand wheel cover so you can look at the levers just under the hand wheel to see why it is not moving back to the straight stitch position when turning the dial. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
June 26, 2014
A:

Thanks for your reply. We applied oil and let it sit for 24 hours. The control began working. It was very stiff at first and then loosened up. Great advice.

Read More
Leland -
June 26, 2014
See more answers