Model #139663956 CRAFTSMAN Garage Door Opener

  • Chassis
    3 Results
  • Rail
    3 Results
  • Receiver
    3 Results
  • Transmitter
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Sears Automatic Door Opener 139.663956 Craftsman Sears electronic garage door opener with receiver & transmitter

A:

Hello, glad to help.  Thank You for choosing Sears PartsDirect.com. We, at Sears, we value your business.
 
I am sorry and do understand your frustration when having trouble with the garage door opener.
 
Glad to help out.  I’m looking at your Craftsman Garage Door opener model number 139.663956.

This is one of the oldes models for the garage door opener.   I know it is over 40 years old.  The only thing you can get for this opener is the remotes.   The remote will come with the transformer, remote, instructions and everything you will need to get this door to open and close.

Garage door opener remote.
 
Please "RESUBMIT ANY FURTHER QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry Jr -
Sears Technician
September 24, 2014
Q:

programming garage door remote 139663956

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the garage door opener.
 
Glad to help out.   Im  looking at your Craftsman Garage Door opener model number 139663956.


Program a garage door opener that has dip switches.   (the very old kind)
 
1.  Make sure your batteries are new or good.
 
2.  Look to the clicker cuied and note the number of button presses required for the door opener.
 
3.  Open the rear or face of the cover plate on the remote.  Remove the face cover plate from the clicker remote.
 
4.  Note the position of each of the numbered dip switches on the old remote.  Set the dip switches on the clicker remote so that they match the positions in the old one.  If you don't have the old remote, use the ladder to climb up to the motor unit and note the position of the dip switches on the rear or the bottom.  You can also change the position of the dip switches on the motor unit if you would want to use a new opener code with the clicker remote.
 
5.  PRess and hold the programming button on the clicker remote until the LED lights.
 
6.  Press the CLOSE or OPEN button on the clicker remote the number of times specified in the installation guide for your door opener.   Press and release the programming button.
 
7.  Replace the face cover plate.  Press one of the remote buttons to open or close the door as needed.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 
 

Read More
Larry L -
Sears Technician
June 02, 2014
Q:

Garage door opener

A:

The Managemylife web site is a good resource to find out what may be happening with your Garage Door Opener. I did some research for you at Managemylife.com and found an excellent article that also has multiple expert answers at the bottom of the web page that addresses the most common questions that have been asked by other members. I hope this will help until your expert can answer your specific question. I attached the link below.

Read More
Alina F. -
March 17, 2012
A:

There isn't a way to program the Homelink system without a programmed remote control present. What the Homelink does is learn to mimic the remote control, so you will have to have one present.



Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
March 19, 2012
See more answers

Top Accessories