Model #13953966SRT1 CRAFTSMAN Garage Door Opener

  • Rail Assembly
    3 Results
  • Installation
    3 Results
  • Opener Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Five yellow blinks 13953966SRT1 Craftsman Garage door opener

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your garage door opener. Upon researching model 13953966SRT1; there may be an obstruction preventing the motor form turning. Check the chain and trolley. Also look at the motor while it’s humming. See if the gears are turning. The blinking light is a code. Five blinks is a miscellaneous code and more info would help narrow it down.

Thank you for choosing Sears Parts Direct. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
August 05, 2015
Q:

My Garage door model 139.53966ST1 is not lighting the lights when the infrared door beam is triggered but the infrared sensor does send the signal to opener! 13953966SRT1 Craftsman Garage door opener

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your garage opener and I do understand your frustration. Glad to help out. I'm looking at your model number 13953966srt1 and from your description I would suspect that the logic board has failed. The door sensors are triggered if something is blocking the beam which will send the door back up and will not go down. The logic board controls the garage light turning off and on when it is activated. If the logic board is defective the opener will not learn codes. Here is a link that may help with additional troubleshooting. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 10, 2014
Q:

1 Light is not working & safety sensors don't turn light on 13953966SRT1 Craftsman Garage door opener

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your garage door opener. Upon researching model  13953966SRT1, the light bulb would have to be replaced if it is not turning on.  I linked the manual below for the testing of the safety reverse system. If the sensors light is not turning on when aligning there could be a short in the wire or the sensor could have to be replaced.

Click here for manual. Page 30 is the safety sensor test.


If you have any further questions please re-post. Thank you for choosing Sears. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
July 25, 2014
A:

FYI: The collar on the light socket is so deep that some bulbs may not make good contact when screwed in. Get a bulb with a longer stem so it can screw into the socket properly.

Read More
Jim -
December 07, 2014
See more answers

Top Parts

Top Accessories