Model #13953800SRT CRAFTSMAN Garage Door Opener

  • Opener Assembly
    3 Results
  • Rail Assembly
    3 Results
  • Installation
    3 Results
  • Accessories
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

garage door opener 13953800srt 13953800SRT Craftsman 1/2 hp garage door opener

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your garage door opener. Upon researching model number 13953800SRT; go through all three adjustments. There may be an issue with the limit switch. Click here for the manual. The adjustments start on page 28.

Thank you for choosing Sears. We appreciate your business. Have a great day.

 

Read More
Jeff Wallace Jr -
Sears Technician
July 12, 2015
Q:

How do I re-set the keyless entry code? 13953800SRT Craftsman 1/2 hp garage door opener

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to reprogram your remote to your Garage door opener. 

On page 33 of your Owner's Manual it does state how to reprogram and erase the remote control. Click here. 

TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/

 

KEYLESS ENTRY PIN USING THE SMART CONTROL PANEL:

1. Press the navigation button below 

"MENU" to view the Features menu.

2. Use the navigation buttons to scroll to 

"PROGRAM" and press the navigation 

button under to continue.

3. Select "REMOTE" or "KEYPAD" to 

program from the program menu. 

Press to continue.

4. Press the button on the remote 

control that you wish to operate your 

garage door.

 OR

 Enter a 4-digit personal identification 

number (PIN) of your choice on the 

keyless entry keypad. Then press the 

 

ENTER button.


ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES

1. Press and hold the learn button on garage door opener until the 

learn LED goes out (approximately 6 seconds). All remote 

control and keyless entry codes are now erased. 

 Reprogram any accessory you wish to use.

ERASE ALL DEVICES

1. Press and hold the learn button on garage door opener until the 

learn LED goes out (approximately 6 seconds).

2. Immediately press and hold the learn button again until the 

learn LED goes out. All codes are now erased.

 

 Reprogram any accessory you wish to use.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

 

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 09, 2015
Q:

How do I re-set the keyless entry code? 13953800SRT Craftsman 1/2 hp garage door opener

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to reprogram your remote to your Garage door opener. 

On page 33 of your Owner's Manual it does state how to reprogram and erase the remote control. Click here. 

TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/

 

KEYLESS ENTRY PIN USING THE SMART CONTROL PANEL:

1. Press the navigation button below 

"MENU" to view the Features menu.

2. Use the navigation buttons to scroll to 

"PROGRAM" and press the navigation 

button under to continue.

3. Select "REMOTE" or "KEYPAD" to 

program from the program menu. 

Press to continue.

4. Press the button on the remote 

control that you wish to operate your 

garage door.

 OR

 Enter a 4-digit personal identification 

number (PIN) of your choice on the 

keyless entry keypad. Then press the 

 

ENTER button.


ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES

1. Press and hold the learn button on garage door opener until the 

learn LED goes out (approximately 6 seconds). All remote 

control and keyless entry codes are now erased. 

 Reprogram any accessory you wish to use.

ERASE ALL DEVICES

1. Press and hold the learn button on garage door opener until the 

learn LED goes out (approximately 6 seconds).

2. Immediately press and hold the learn button again until the 

learn LED goes out. All codes are now erased.

 

 Reprogram any accessory you wish to use.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

 

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 09, 2015

Top Parts

Top Accessories