Model #13953689 CRAFTSMAN Garage Door Opener

  • Garage Door Opener (no Image)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Where can I get the manual for the device which tells you if your garage door is open?

A:


Unfortunately, a replacement or duplicate Instruction Sheet/Manual for this system is not available, but the system is pretty simple to use.

There are two parts to the Door Monitor System, the Receiver, that you see the lights blinking on and a Transmitter that mounts on the garage door itself. The blinking lights you see on the Receiver mean that your Transmitter has a low battery. Use the link below for more information on checking and changing the battery.

Read More
expert -
Sears Technician
September 13, 2007
A:

Where is the link?

Read More
Mark -
September 25, 2013
A:

Hey Mark, thanks for the question and for using SearsPartsDirect.com. Sorry to hear about the issue you are experiencing with the garage door monitor, I know how frustrating that can be.

For convenience, I have attached to this response a document showing how to connect the monitor to the receiver as well as a general use document to help. If you are viewing this response on SearsPartsDirect.com, click here to view this response on ManageMyLife.com to see the attachments. 

These should get you back up and running in no time. If you have any further questions or concerns, please don't hesitate to ask. Thanks again for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
September 26, 2013
See more answers
Q:

I changed my battery... How to I reconnect with received? 13953689 Craftsman Garage door opener

A:

Hey Mark, thanks for the question and for using SearsPartsDirect.com. Sorry to hear about the issue you are experiencing with the garage door monitor, I know how frustrating that can be.

For convenience, I have attached to this response a document showing how to connect the monitor to the receiver as well as a general use document to help. If you are viewing this response on SearsPartsDirect.com, click here to view this response on ManageMyLife.com to see the attachments. 

These should get you back up and running in no time. If you have any further questions or concerns, please don't hesitate to ask. Thanks again for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
September 26, 2013
Q:

My Craftsman garage door monitor lights keep flashing. I replaced the battery and both lights still continue to blink & have no idea where to find the serial #.

A:

I am sorry that you are having some difficulties with your garage door opener and I will be happy to help. I suggest you add to the thread of this question and include the full model number of your garage door so that the expert can provide you with a more detailed answer. I am adding a link below to help you locate the model number. I am also adding a second link that describes a similar question. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
May 14, 2012
A:

Thank you. I did relocate the monitor to the garage and still it won't pick up the sensor. I found the model # I hope... 139.53689

Read More
Geraldo R -
May 14, 2012
A:

Well I found this topic Craftsman Garage Door Sensor Monitor FEBRUARY 29, 2012. I like Joyce must need a new system. Unfortunately, mine isn't under warranty. Thanks for your help Joseph P.

Read More
Anonymous -
May 14, 2012
A:

Thank you for submitting a question to Manage My Life.

If you have replaced the battery and moved the monitor to the garage and it still will not pick up the signal, the monitor will need to be replaced.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
May 17, 2012
See more answers

Top Parts

Top Accessories