Model #13953675SRT CRAFTSMAN Garage Door Opener

  • Opener Assembly
    3 Results
  • Installation
    3 Results
  • Rail Assembly
    3 Results
  • Accessories
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

remote can not open craftsman garage door 139.53675SRT1

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your questions about your Craftsman garage door opener model 139.53675SRT1. I am so sorry you are having problems with the remote control and the keyless entry. I know how inconvenient it can be when the garage door opener isn’t working right. I will be happy to help you with this. 

Since you had to change a battery in one of the remotes, it is possible that it needs to be reprogrammed. I have included the link below for you to view the owner’s manual online. This way you can review the programming instructions to make sure you don’t miss a step. 

The remote may lose its operating range if it is programmed within 3 feet of the garage door opener or receiver. What happens is the code is accepted but it is on the wrong frequency. If this happens try reprogramming the remote using the steps in the manual. The only difference is after you have pressed and released the learn button on the garage door opener, walk outside of the garage before releasing the button on the remote control. If the new battery and reprogramming the remote doesn’t work, then the remote may need to be replaced. Because of the age of this unit, you may want to consider a newer, more secure system. 

I have included the link to our manufacturer’s support website. There are several helpful tips in the frequently asked question section and support videos to watch. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
March 26, 2015
A:

We have a constant beep about every 30 seconds, its driving me nuts. We had this craftsman device, I think that is whats beeping. Is there a battery in this box?

Read More
chuck -
December 15, 2015
See more answers
Q:

Same question as before!!!! 13953641SRT Craftsman Garage door opener

Q:

Garage door will open but not close 13953641SRT Craftsman Garage door opener

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Craftsman garage door opener model 139.53675SRT2. I am so sorry the door will not close. I know you want this issue resolved quickly so you can feel confident that the garage is secure. I will be happy to help you with this. 

There are a few issues that could prevent the door from closing. There could be an issue with the safety sensors. The door could be out of balance. Or the force and limits may need to be adjusted. I have included some links that will take you through the steps to test and correct these issues.
I have started with a link to our garage door opener troubleshooting guides and the manual for your model. The manual includes the instructions for testing the safety sensors and for adjusting the door travel limits and force. If the door isn’t closing, the down force may need to be increased. 


I have also included our manufacturer’s door balance test. If the door fails the balance test you will need a qualified technician to balance the door for you. It is a dangerous process if you are not well versed in how to complete the repair. 

I have also included the manufacturer’s link on checking the safety sensors which includes checking the wiring.

If the sensors are fine, disconnect the door from the trolley. This will prevent the opener from engaging while you are performing a visual inspect of the rails. Look for anything that may be interrupting the travel of the trolley.

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). 
 
I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
August 15, 2015
A:

I have green lights on the safety sensors... The door is fine and have been working it manually for a week, also there is no balance problems. I have turned the worm gear until trolley alone, reaches about half way down the track and pushed the wall button and the trolley goes to the stop and that is it... when I push the button again, the motor unit clicks and nothing else. I did notice a flashing green light near where the SRT button is located and it flashes five times.

Read More
Andrew -
August 15, 2015
A:

Also I have read all the trouble shooting guides in the manual and on-line on the web site...

Read More
Andrew -
August 15, 2015
See more answers

Top Parts

Top Accessories