Model #13953674SRT2 CRAFTSMAN Garage Door Opener

  • Security & Standard Accessories
    3 Results
  • Hardware/extension Kits/bulbs
    3 Results
  • Opener Assembly
    3 Results
  • Installation Parts
    3 Results
  • Rail Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Crafstman 139.53674SRT2 garage opener. Cant sync with new keypad 139.3050 Crafstman 139.53674SRT2

Q:

Problem programing 2 remotes 13953674SRT2 Craftsman Garage door opener

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your garage door opener. Upon researching model 13953674SRT2; erase the code from the opener. Then re-program one at a time. Click here for the owner’s manual. The instructions are on page 33.

Thank you for choosing Sears Parts Direct. We appreciate your business. Have a great day.

 

Read More
Jeff Wallace Jr -
Sears Technician
August 03, 2015
A:

I have erased the code from the opener and tried to re-program one remote at a time and it still does not work. Now, not only does only one remote not work but the keypad on the outside of the garage does not work also.

Read More
Henry -
August 03, 2015
A:

one of our remotes stopped working. New battery did not help. I ordered 2 new ones (part 4iA5032) and just received them. We were anticipating re-programming them but when we opened them to put batteries in, they have no "guts"! No circuit board like the old ones! Now I see they are listed as "remote control HOUSING"

Read More
Deb -
August 19, 2015
A:

Problem programming 2 remotes. I have the owner's manual and have followed all directions, but my opener will only allow me to program one remote at a time. I have model 139.53681B and like person described above, my remote stopped working, so I erased the codes by pushing the SRT button on the opener. Then I would push the button on each remote and the indicator light would come on for each remote and so they are ready to be programmed. However, after I program the first remote the second remote would not light up the indicator light when I would push the button on the remote, thus not allowing me to program the second remote. So, I would start all over erasing the codes again and I would program remote number 2 first this time, but then again it would not allow me to program a second remote after one has already been programmed. I have changed the batteries as well and each remote can be programmed to work, just not at the same time. Please help! Thank you! Rodney Melton

Read More
Rodney -
August 29, 2015
See more answers
Q:

Keypad door code 13953684 Craftsman Keyless entry remote

A:

Thank you for choosing Sears and contacting us with your question about programming the Craftsman keypad model 13953684 to your Craftsman garage door opener model 139.53674SRT2. I am so sorry you are having trouble with this.  I will be happy to help you. 

Since you do not know the code of the keypad, you will need to erase the codes and then reprogram the keypad and the remote controls. I have included the links below for you to view the owner’s manuals for the garage door opener and the keypad.

The information for erasing the codes and reprogramming will be in the garage door opener manual under Receiver and Remote Control Programming.  I have also included a link to our manufacturer’s troubleshooting instructions. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
July 28, 2015

Top Parts

Top Accessories