Model #13953662SRT CRAFTSMAN Garage Door Opener

  • Opener Assembly
    3 Results
  • Rail Assembly
    3 Results
  • Installation
    3 Results
  • Accessories
    3 Results
  • Security & Standard Accessories
    3 Results
  • Hardware/extension Kits/bulbs
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Replacement garage dooe open will not program

A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with programming the remote to the garage door opener. We are here to help. The instructions you was giving works on original replacement remotes. The remote you purchase 139.30498 is a universal remote. The programming instructions for universal remotes are slightly different. That is why it came with the instructions. I have posted the instructions below for programming that remote. I hope this helps.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.
 

 

Read More
John H -
Sears Technician
August 26, 2013
A:

Thank you for sending the directions I stated I already tried. But this does not help me with my problem. Please re-read my question.

Read More
Anonymous -
August 26, 2013
A:

Thank you for sending the directions I stated I already tried. But this does not help me with my problem. Please re-read my question.

Read More
Johanna -
August 26, 2013
A:

What is the model number of the garage door opener ? The image below may be of use in locating the opener model number.

Read More
Anonymous -
August 26, 2013
A:

Thank you for your help. Model # 139.53662SRT2

Read More
Johanna -
August 26, 2013
A:

Johanna, The directions you stated above is not the same as the image. You have to put the remote in programming mode. Also, once it is programmed, another button has to be pushed to lock it into memory.

Read More
John H -
Sears Technician
August 27, 2013
A:

From my question: Following the very simple directions, it does not program. (These were the directions that came with the part, and the ones you sent.) When they didn't work I chatted with a rep and they directed me to a site with answers given to others who have had the same problem with programing this replacement remote. I tried these as directed by the rep. AFTER trying the directions that came with the part and you sent.

Read More
Johanna -
August 27, 2013
A:

Johanna, The instructions that was given on chat, is for the original replacements remotes. The instructions that came with the remote and what I provided, are for the universal remote. I recommend checking the back of the opener for a blinking led. That would indicate a signal from another source, preventing the remote from programming. However, if there is no blinking led, then I suspect the logic board has a memory problem. The logic board needs to be replaced. The universal remotes usually work properly.

Read More
John H -
Sears Technician
August 28, 2013
A:

Thank you for your time, I have just purchased a new garage door opener.

Read More
Johanna -
August 28, 2013
A:

Johanna. The universal remote should program to the new opener.

Read More
John H -
Sears Technician
August 29, 2013
See more answers
Q:

Need help programming a 139.53876 Wireless keyless entry for my garage door opener.

A:

The garage door opener is great for added security and protecting your car. It can be most frustrating and a hassle when trying to get the remotes and keyless entry to work. I did find some information for you that I am hoping will help you. I am adding the link below to help you with your question while you wait for your expert response. I do hope this will help you.

Read More
Marc H -
May 06, 2012
A:

I know that it can be very frustrating to have issues with your garage door opener. It sounds like you are using a keypad and remotes that are not compatible with each other. The opener uses a rolling code technology to program. The keypad code and the remote code will both work with the opener, but not with each other. You are programming a different code into the system every time you program them, which knocks out the other one. The keyless entry that you need for this unit is 139.53684. If you would like to order it just click on this link: Sears Parts Direct . If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
May 07, 2012
A:

Thanks for you help. When I spoke with a Sears customer service rep they said it would work. The use guide that is online with the product also says it will work with my series of opener. Anyway, someone needs to get that corrected.

Read More
Mike -
May 08, 2012
A:

I have Wireless Key Entry model 139.53876 which worked fine with my opener model 139.53515SR. I purchased a new opener model 139.53930DM. The new opener fails to "learn" the signal from the older Wireless Key Entry. Should they be compatible?

Read More
Tom -
May 23, 2015
A:

I have the outside key pad #139.93876 that I need to know how to program. I do have one remote that works fine. Help Thanks Ron

Read More
rhawkins22 -
June 15, 2015
See more answers
Q:

garage Door opener intermittent 139.53662SRT2

A:

Thank you for the inquiry and for using SearsPartsDirect.com. I am sorry to hear about the intermittent issues you are experiencing with the garage door opener, I know how frustrating that is.

I am suspecting you are having an issue with the logic board in the unit, which acts as the receiving unit from the transmitters (remote controls). It sounds like the receiver (logic board) is just weakened over time and usage. What really leads me to suspect that is due to the fact the wall control (hard wired) works consistently. Since the wall control is fed by wires, it would make sense the logic board is becoming defective and will need to be replaced to solve the issue.

Since this unit was manufactured in or around 1997, I would think a replacement overhead unit would be the most economical choice, as a new logic board will be around $95 and they can be somewhat intensive to install. A whole new unit may run from $150-$200 but would be much easier to install and all the internal componenents would be new, so you wouldn't have to worry about additional mainenance in the near future.

Hopefully this sheds light on the issue you are experiencing. I hope it all works out for you and if you have any further questions or inquiries, please don't hesitate to ask. Thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
September 11, 2013

Top Parts

Top Accessories