Model #137285940 CRAFTSMAN Miter Saw

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

replacing a switch on Miter Saw model # 137285940 137285940

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you. I did look into your question and yes we do ship to Canada. You will need to contact 18004MYHOME and they can connect you to the Canada department. Yes, the switch should include the button. In the diagram it looks like it does come with the spring because the spring is not sold separate or has a separate part number. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
August 06, 2014
Q:

craftsman miter saw 137.285940

A:

While your waiting on an expert response I have provided you with a manual similar to your model. It may explain where to locate the reset button. I hope this helps!

Read More
Jacqueline S -
November 21, 2010
A:

Your miter saw does not have a reset button. The motor has a thermal overload protector built in. If the overload trips, it should reset itself when the motor cools.

The overload protector is not sold as a separate part. If the motor won't start you should take the saw to Sears for repair. You can find the nearest location at [http://services.sears.com/shs/category/repair?sid=MMLxexpertxmerch].

Read More
Jimmy K -
Sears Technician
November 22, 2010
See more answers
Q:

craftsman miter saw 137.285940

A:

While your waiting on an expert response I have provided you with a manual similar to your model. It may explain where to locate the reset button. I hope this helps!

Read More
Jacqueline S -
November 21, 2010
A:

Your miter saw does not have a reset button. The motor has a thermal overload protector built in. If the overload trips, it should reset itself when the motor cools.

The overload protector is not sold as a separate part. If the motor won't start you should take the saw to Sears for repair. You can find the nearest location at [http://services.sears.com/shs/category/repair?sid=MMLxexpertxmerch].

Read More
Jimmy K -
Sears Technician
November 22, 2010
See more answers

Top Parts

  • Ball

    Part: 29835L5003

    $ 3.99

    In Stock