Model #137228010 CRAFTSMAN Saw Table

  • Body
    3 Results
  • Blade
    3 Results
  • Blade Guard Assembly
    3 Results
  • Motor Housing
    3 Results
  • Leg Stand
    3 Results
Find part by diagram >

Question and Answers

Q:

fence replacement 137228010 Craftsman Table saw

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear that the RIP fence for the table saw has been discontinued. I know how frustrating that is.

There are some aftermarket fences made for table saws, and that will be the best option. You will just need to search online for a 10" table saw fence, and look at the varying options. I am sure you will find something that works. There are some aftermarket fences on Sears.com as well, so you can check to see what we have available. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 02, 2015
Q:

137.228010 10" 3HP Table Saw Power Problem 137.228010

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you're having with the table saw motor. I know how frustrating that is to have happen.

This sounds like an issue with the motor windings or possibly the motor brushes. You could test the motor and the brushes to be sure which is at fault. To check the motor is just a simple continuity test across the brush motor leads. If it is does not show continuity the motor is bad.

To check carbon brushes with a continuity tester, remove the motor lead wires from the circuit. Tag the wires as you disconnect them so that you'll be able to reconnect them properly. Hook the tester clip to one motor lead and touch the probe to the other lead; the tester should light or buzz. Slowly rotate the motor shaft, keeping the tester in position. If the tester doesn't light or buzz, or if it flickers or stutters when you turn the motor shaft, the brushes should be replaced. If the springs behind the brushes are damaged, they should be replaced as well.

Unfortunately, the motor itself is no longer available for purchase. The motor brushes are part number 0QQT, and you would need a quantity of two. They can be purchased from Sears Parts when needed or after testing.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Sr -
Sears Technician
November 26, 2014
Q:

Switch Box Wiring - Table Saw 137.228010 137228010 Craftsman Table saw

A:

After doing some more research and getting help from friends, I was able to resolve the problem. The replacement overload breaker also has sides labeled "line" and "load", so that made things easier. Disconnect the power. The black wire contained in the cable coming in from the power source is the "line" or "always hot" wire. Connect this wire to the line side of the overload breaker. Connect the black wire leading to the motor to the "load" side of the breaker. This "load" wire carries the power "downstream". Connect the white wires to the on/off switch. It does not matter which white wire is attached to which prong of the on/off switch. It is worth having a continuity tester (less than $3) to ensure the switches are making a circuit. If one of the switches doesn't make a circuit, it's a problem. However, if each of the switches does make a circuit, it doesn't necessarily mean the switches are not a problem. Also, having a voltage detector (less than $12) will help to ensure you have the correct wire identified as the hot wire.

Read More
Eric -
November 26, 2013
A:

To clarify, the original overload breaker did not have labels for line and load.

Read More
Eric -
November 26, 2013
A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
December 05, 2013
See more answers

Top Parts