Model #137221960 CRAFTSMAN Saw Table

  • 10" Table Saw 137221960
    3 Results
  • Leg Stand
    3 Results
Find part by diagram >

Question and Answers

Q:

Power cable replacement part 137.221960

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Craftsman table saw model 137.221960. I am so sorry the power cable is damaged and needs to be replaced. This is a part Sears stocks. I think you may have had trouble locating it because the part number you have is wrong. I have located the correct part and have included the link below for you to view and order the part. Once you have the part I recommend you have the part installed by a qualified technician. 

 We strongly advise against completing the repair yourself. This product has a double insulated system. Any repair of this tool requires dielectric testing to ensure the operator’s safety. To avoid the possibility of alteration or damage to the double insulated system, service should only be performed by your nearest Sears repair center. The repair must be completed using the necessary diagnostic and testing equipment to assure continued compliance with applicable UL requirements. After the completion of the repair, the product must be checked using high voltage testing equipment to prevent a severe shock hazard which may occur if the part is not properly installed and tested.  

For these safety reasons we do not provide a technical manual or an electrical diagram. Here at SearsPartsDirect.com we love to help you with your do-it-yourself repair projects, but in this case, for your safety, the table saw should only be repaired by a qualified technician with the proper testing equipment. Thank you for your understanding in this matter and thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
June 17, 2015
Q:

Extension wings 137221960 Craftsman Table saw

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help you with that.
Upon researching model 137221960 it does not have extension wings.

If you have any further questions please repost. Thank you for choosing Sears. Have a great day.

Read More
Samantha A -
Sears Technician
May 15, 2014
Q:

Table saw blade won't raise... 137.221960

A:

I'm sorry about the difficulties you're having with your table saw.  While you are waiting for an expert to respond I was able to locate some great information that could possibly assist you with your issue.  I have added the link. Hope this helps!

Read More
Yadira B -
May 02, 2013
A:

Question- By Threaded Crank do you mean the Handwheel? Yoiu may want to refer to page 10 - BLADE RAISING HANDWHEEL (FIG. E) of your Owners Manual - If needed you can download an Owners Manual at the link below.

Read More
Anonymous -
May 02, 2013
A:

Hi,

Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your appliance not working.

The pin in the turn wheel may have broken.  If the shaft is broken I would suspect the threads on the shaft are stripped.  

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
May 04, 2013
See more answers