Model #137218010 CRAFTSMAN Saw Table

  • Table Saw
    3 Results
  • Stand
    3 Results
  • Motor Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

Where can I find a PDF of my operator's Manual

A:

The owner's manuals can be invaluable. I did not find one listed online here at Manage My Life but it looks like you may be able to get a manual at Sears Parts Direct. I attached the link below if you want to check it out.

Read More
Barbara H. -
January 13, 2011
A:

They had a schematic, but not the Operator's manual

Read More
Stan -
January 13, 2011
A:

Thank you for your question.

I can understand wanting the manual for your saw.

I have e-mailed it to you.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
January 14, 2011
A:

Thanks, Sam, but that is not the correct model number. Mine is 137.218071 (I just purchased it yesterday) . the one you sent was for 137.218010

Read More
Stan -
January 14, 2011
A:

Thank you for the update. I am sorry that your model number is not in the MML site yet. It is too new. Since this is a new product, I would suggest that you can 1-800-4my -home and talk with a technical specialist and they will be glad to order one for you not charge. The part number for the manual is 2SUS. Again I am sorry that we didn't have it available for you to download yet. Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
January 14, 2011
A:

I would also like the manual.. I'm on hold with MML right now, but having to wait to get this in the mail is just ridiculous. I'm baffled why this isn't online yet. Got to be a digital copy somewhere to upload... if not, get an intern to scan one and upload it.

Read More
Kenn -
January 15, 2011
A:

I need to know what the max size dado blade diameter is for the 137218071 table saw? thanks

Read More
robert -
February 06, 2015
See more answers
Q:

How do I install a new ball bearing (OHV8) and baffle (OR20) on my table saw?

A:

I know how helpful it is to have the instructions to replace the ball bearing for your table saw. I was able to find a link that includes instructions to replace this part. I attached the link below. An expert will respond shortly. I hope this helps.

Read More
Jackie S -
July 26, 2012
A:

Thank you for your question on the baffle and bearing installation.

Without the model number for the saw I cannot give you specific information.

Please reply with the model number of the table saw and I will be happy to help you.

Sam A.

Read More
Sam A -
Sears Technician
July 27, 2012
A:

The model number is 137.218010. I'm having a hard time getting the right part. I need the OHVU part, which is a plastic disc about 3 inches in diameter that sort of looks like a fan. I've ordered the part and they keep sending me an actual metal bearing, Y3Z9. I can't imagine that part could be a replacement because they look nothing alike. Any help would be greatly appreciated.

Read More
Jesse -
August 03, 2012
See more answers
Q:

table saw wireing diagram

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Barbara H. -
November 04, 2011
A:

thank you

Read More
william -
November 04, 2011
A:

We are not given wiring diagrams for source 137 table saws.

The wiring for a table saw is fairly simple. The on off switch will have either 2 or 4 wires on it and the overload usually has only 2. Look on the original switch and overload to see how the terminals are marked. If the terminal has line by it a wire from the power cord goes there. The wires that go to the motor are usually marked load.

If the overload has only 2 terminals, it doesn't matter which wire goes where.

I am sending a wiring diagram for a different type of table saw that might help. If your motor doesn't have brushes, it will wire to the switch and overload the same as the motor with brushes.

Read More
Jimmy K -
Sears Technician
November 07, 2011
See more answers

Top Parts