Model #137216100 CRAFTSMAN Saw Scroll

  • 16" Scroll Saw
    3 Results
Find part by diagram >

Question and Answers

Q:

table lock knob for Craftsman scroll saw 137216100 Craftsman Saw

A:

Thanks for the inquiry and for being a valued member.

The table lock knob is illustrated on the parts diagram. It's broken down from key numbers 38-42 depending on what's needed. The handle plunger is key 38 (part 0751), and the tension handle is 41 (part 0752). If you need the entire assembly, you would need to order a quantity of one of parts 38-42. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 15, 2015
Q:

137.216100 don't run 137216100 Craftsman Saw

A:

Thanks for the inquiry and for being a valued member.

This sounds like this is in the motor control circuit. It may be in the wiring, or the control board. I believe this saw has an overload circuit breaker, maybe resetting that could help. If not, I would open the unit up and look at the control board. It could be an issue with a solder connection, or a loose wire. It does look like the controller has been discontinued, but an electrical supply shop may be able to repair the current board.

We apologize for the inconvenience, and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
May 20, 2015
Q:

`37.216100 would run 137216100 Craftsman Saw

A:

Thanks for the inquiry and for being a valued member.

This sounds like this is in the motor control circuit. It may be in the wiring, or the control board. I believe this saw has an overload circuit breaker, maybe resetting that could help. If not, I would open the unit up and look at the control board. It could be an issue with a solder connection, or a loose wire. It does look like the controller has been discontinued, but an electrical supply shop may be able to repair the current board.

We apologize for the inconvenience, and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
May 20, 2015