Model #137212920 CRAFTSMAN Miter Saw

  • 12" Sliding Compound Miter Saw
    3 Results
  • Miter Bar And Guide Holder
    3 Results
  • Motor And Blade Guard
    3 Results
  • Motor Housing And Armatrue
    3 Results
Find part by diagram >

Question and Answers

Q:

Is this a bracket assy? 137212920 Craftsman Miter saw

A:

Thanks for the inquiry and for being a valued member.

You are correct; it does sound like you need key 50, the slide-bar set to fix the issue. That part number will just be for the brackets, so if you need the pivot shaft or any other components that go with it, they will need to be ordered singly. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 04, 2015
Q:

12" sliding miter saw 137212920 Craftsman Miter saw

A:

Thanks for the inquiry and for being a valued member.

In order to test the switch, you will need to have a multimeter, and you will need to test it for continuity.

Take a picture of the wires on the switch and where each one connects. Then remove the switch and test continuity with the meter. Set for the lowest continuity (Ohms) you have like 200 ohms. When testing, the meter should read 0 or very close when pushing the switch button.

There are some great resources online for testing these types of switches on YouTube or some forums. Just run some internet searches if needed.

I hope that helps and thanks for using SearsPartsDirect.com. We appreciate your business.

Read More
Jeff Wallace Sr -
Sears Technician
April 20, 2015
Q:

Dynamic Brake not working 137212920 Craftsman Miter saw

A:

Thank you for you question and I understand your concern.

The wiring diagram is not available. I recommend taking the saw to your nearest Sears service center for repair. 

Read More
Joey S -
Sears Technician
September 22, 2014

Top Parts