Model #137212410 CRAFTSMAN Miter Saw

  • Base Assy
    3 Results
  • Motor Assy
    3 Results
  • Stand Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

Blade guard assembly instructions 137212410

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your miter saw and I do understand your frustration. Glad to help out. I'm looking at your model number 137212410 and the manufacturer does not provide a service manual for disassembly but a possibility that instructions are included with the part. Typically you will want to take photos as you remove parts unless you are able to memorize where all the parts go. Here is a link for some videos that may help. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 21, 2015
A:

Thanks! It's asking for a username and password when I click on that link. No link to register either...

Read More
Michael -
January 21, 2015
See more answers
Q:

Model 137.212410 Saw Issue 137.212410

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your saw and I do understand your frustration. Glad to help out. I'm looking at your model number 137212410 and it seems like the handle with the bevel bolt item x3t8 may have broken from the inside. You will need to remove the handle item x3t2 and verify what parts will need to be replaced. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 20, 2014
Q:

Excessive blade runout 137212030 Craftsman Compound miter saw

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Sorry to hear of the blade wobble issue you are experiencing with the miter saw, I know how frustrating that is to have to work with. 
There are three main things that cause blade wobble: the blade itself, blade not being tight or the washers, and bad arbor bearings. 
The first two are pretty easy to rule out, and if you have, then the bearings would be the most logical choice. Based upon bearings X3PW, those are not model specific to your unit. They would go to models 137212360 or 137212410. For your model of 137212030, the arbor bearings are part of the arbor shaft assembly, and the part number is 0QM6. The bearings between the models would be different, and to ensure you get the correct one, you would need to order the model specific assembly.
For convenience, I have linked the assembly below. Just click the blue link to be directed to SearsParts to order when needed.

Arbor Shaft Assembly w/ Bearings for Model 137212030

Hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 19, 2014

Top Parts