Model #137212030 CRAFTSMAN Miter Saw

  • Saw Assy
    3 Results
  • Motor Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

How to install new pivot spring on Craftsman miter saw 137.212030

Q:

Excessive blade runout 137212030 Craftsman Compound miter saw

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Sorry to hear of the blade wobble issue you are experiencing with the miter saw, I know how frustrating that is to have to work with. 
There are three main things that cause blade wobble: the blade itself, blade not being tight or the washers, and bad arbor bearings. 
The first two are pretty easy to rule out, and if you have, then the bearings would be the most logical choice. Based upon bearings X3PW, those are not model specific to your unit. They would go to models 137212360 or 137212410. For your model of 137212030, the arbor bearings are part of the arbor shaft assembly, and the part number is 0QM6. The bearings between the models would be different, and to ensure you get the correct one, you would need to order the model specific assembly.
For convenience, I have linked the assembly below. Just click the blue link to be directed to SearsParts to order when needed.

Arbor Shaft Assembly w/ Bearings for Model 137212030

Hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 19, 2014
Q:

Wiring a microswitch in a craftsman miter saw

A:

It sounds like you have the switch and wiring correct. I cannot find anything from the manufacturer to verify this, but most of these type machines will wire in the way you've done yours.

Is the machine not running correctly after you wired it or are you just checking before you try it?

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
September 18, 2013

Top Parts