Model #1345 BLACK & DECKER Drill Driver

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Dishwasher not cleaning dishes DU1345XTVB5

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model DU1345XTVB5; Make sure the water temperature is not too low, for best results the water should be 120F (49C) as it enters the unit. If the water temperature is too low in the unit there could be a problem with the heat element or the thermostat causing the unit not to clean as good as it used to.  

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 19, 2015
Q:

missing installation instructions DU1345XTVQO

A:

Thank you for contacting SearsPartsDirect.com with your question about your Whirlpool Dishwasher model DU1345XTVQ0. I am so sorry the friction sleeve, part number 8268961, needs to be replaced. I know how frustrating it can be when you are ready to complete your repair but it isn't clear how to install the part. I will be happy to help you with this. 

Safety Warning: Disconnect the power supply to the dishwasher before you begin your repair to prevent the risk of injury from electrical shock. You can do this at the circuit breaker or by unplugging the power cord to the dishwasher. 

The friction sleeve prevents the spring and hinge from rubbing metal on metal. This not only helps protect the parts, but also prevents noise. You will need to remove the lower access panel to access the hinge arm. (You do not need to remove the door.) Next you will need to disconnect the hinge spring from the end of the hinge arm. Slide the friction sleeve over the hinge arm and then reattach the hinge spring. (If the other friction sleeve is still intact you can use that as a guide to see how far to slide the new sleeve in place on the hinge arm.)

I hope this answers your question. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
June 13, 2014
Q:

Substitute part 1581345180 Kenmore Kenmore sewing machine

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Due to the age of this product, the original table is no longer available. However, Sears does offer an aftermarket table that you can purchase for the sewing machine. The part number is 9803.
For convenience, I have included a blue link below that you may click on to be directed to SearsParts to purchase the add-on table if needed.

Sewing Machine Add-A-Table

Hope this helps and let us know if we can be of any further assistance. Thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
March 29, 2014

Top Parts