Model #12H AMANA Upright Freezer

  • Model 12
    3 Results
  • Models 12a, 12a1, 12a2
    3 Results
  • Models 12b
    3 Results
  • Model 18
    3 Results
  • Model 18a
    3 Results
  • Model 18b, 18b1, 18b2
    3 Results
  • Model 18c
    3 Results
  • Models 12e, 12f, 12g, 12h, 15, 15a, 15b, 19, 19a, 19b
    3 Results
  • Door Assembly - Models 12e, 12f, 12g, 15, 19
    3 Results
  • Door Assembly - Models 12h, 15a, 15b, 19a, 19b
    3 Results
  • Shelf, Ice Cream Unit, Condensing Unit
    3 Results
  • Cabinet And Refrigeration
    3 Results
  • Door Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

How long is the fuel line? 12H8022675B1 Briggs&stratton Engine

A:

Thanks for the inquiry and for being a valued member.

The fuel hose 791766 is 9" long. It is a cut to fit hose, so if it's too long, you cut off the excess. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 17, 2015
Q:

Ask your own question or join this conversation

A:

It can be frustrating when your lawn mower isn't functioning properly. I researched your question and found someone asked a question similar to yours. Here is what was posted by an expert, I have provided the link below. I hope this helps!

Read More
Jacqueline S -
August 01, 2010
A:

Most times this problem is caused by the primer bulb itself having small holes or cracks in it. It would need to be replaced if that's the case. The problem can also be due to the carb jets being stopped up. If the primer bulb looks good, I would recommend pulling the carb down and cleaning it with carb/choke cleaner.

Read More
XX Wade_ -
Sears Technician
August 03, 2010
A:

How would I find out how long the fuel line is

Read More
Kamela -
June 15, 2015
See more answers
Q:

head and flywheel bolt torque 917377151 Craftsman Gas, walk behind lawnmower

A:

Thanks for the inquiry and for being a valued member.

Based upon Briggs & Stratton engine model 12H802-2640-B1, the flywheel nut torque is 55 ft./lbs. and the cylinder head bolts are 140 in./lbs. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 15, 2015