Model #128M02-0952-F1 BRIGGS & STRATTON Engine

  • Cylinder/crankshaft/sump
    3 Results
  • Carburetor/fuel Tank
    3 Results
  • Rewind Starter/flywheel
    3 Results
  • Gasket Sets
    3 Results
Find part by diagram >

Question and Answers

Q:

Cannot locate oil dipstick part number 247374900 Craftsman Mower

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Craftsman tractor.

From the information you have provided above, researching model number 247.374900. The dipstick for your model is part#499621. It’s located in the parts breakdown of the engine. The model number for the engine is 128m02-0952-f1.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
April 20, 2015
Q:

I have a mower, Model #247374900 that will not start. 247374900

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Since it starts with squirting gas into the carb, it sounds like there is an internal clog or partially clogged jet or a sticking needle/seat. Even though you've dumped the gas, the internals are more than likely varnished and the carb will more than likely need to be cleaned, rebuilt, or replaced to completely solve the issue.
Based upon Craftsman mower model 247374900, I see it uses a Briggs 128M02-0952-F1. Based upon that model, I see the carb part number is 799866, and the rebuild kit is part number 498260.
I have provided both links below that you may click on to be directed to the SearsParts site to view and purchase either option.

Carburetor for Model 128M02-0952-F1

Carburetor Rebuild Kit for Model 128M02-0952-F1

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
May 12, 2014
A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Since it starts with squirting gas into the carb, it sounds like there is an internal clog or partially clogged jet or a sticking needle/seat. Even though you've dumped the gas, the internals are more than likely varnished and the carb will more than likely need to be cleaned, rebuilt, or replaced to completely solve the issue.
Based upon Craftsman mower model 247374900, I see it uses a Briggs 128M02-0952-F1. Based upon that model, I see the carb part number is 799866, and the rebuild kit is part number 498260.
I have provided both links below that you may click on to be directed to the SearsParts site to view and purchase either option.

Carburetor for Model 128M02-0952-F1

Carburetor Rebuild Kit for Model 128M02-0952-F1

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
May 12, 2014
A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Since it starts with squirting gas into the carb, it sounds like there is an internal clog or partially clogged jet or a sticking needle/seat. Even though you've dumped the gas, the internals are more than likely varnished and the carb will more than likely need to be cleaned, rebuilt, or replaced to completely solve the issue.
Based upon Craftsman mower model 247374900, I see it uses a Briggs 128M02-0952-F1. Based upon that model, I see the carb part number is 799866, and the rebuild kit is part number 498260.
I have provided both links below that you may click on to be directed to the SearsParts site to view and purchase either option.

Carburetor for Model 128M02-0952-F1

Carburetor Rebuild Kit for Model 128M02-0952-F1

Hope this helps and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
May 12, 2014
A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Since it starts with squirting gas into the carb, it sounds like there is an internal clog or partially clogged jet or a sticking needle/seat. Even though you've dumped the gas, the internals are more than likely varnished and the carb will more than likely need to be cleaned, rebuilt, or replaced to completely solve the issue.
Based upon Craftsman mower model 247374900, I see it uses a Briggs 128M02-0952-F1. Based upon that model, I see the carb part number is 799866, and the rebuild kit is part number 498260.
I have provided both links below that you may click on to be directed to the SearsParts site to view and purchase either option.

Carburetor for Model 128M02-0952-F1

Carburetor Rebuild Kit for Model 128M02-0952-F1

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
May 12, 2014
A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Since it starts with squirting gas into the carb, it sounds like there is an internal clog or partially clogged jet or a sticking needle/seat. Even though you've dumped the gas, the internals are more than likely varnished and the carb will more than likely need to be cleaned, rebuilt, or replaced to completely solve the issue.
Based upon Craftsman mower model 247374900, I see it uses a Briggs 128M02-0952-F1. Based upon that model, I see the carb part number is 799866, and the rebuild kit is part number 498260.
I have provided both links below that you may click on to be directed to the SearsParts site to view and purchase either option.

Carburetor for Model 128M02-0952-F1

Carburetor Rebuild Kit for Model 128M02-0952-F1

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
May 12, 2014
A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Since it starts with squirting gas into the carb, it sounds like there is an internal clog or partially clogged jet or a sticking needle/seat. Even though you've dumped the gas, the internals are more than likely varnished and the carb will more than likely need to be cleaned, rebuilt, or replaced to completely solve the issue.
Based upon Craftsman mower model 247374900, I see it uses a Briggs 128M02-0952-F1. Based upon that model, I see the carb part number is 799866, and the rebuild kit is part number 498260.
I have provided both links below that you may click on to be directed to the SearsParts site to view and purchase either option.

Carburetor for Model 128M02-0952-F1

Carburetor Rebuild Kit for Model 128M02-0952-F1

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
May 12, 2014
A:

Thanks for info. I found main jet plugged (carb cleaner would not clear).Used a very thin wire to gently clean orifice.All is well,started on first pull. Brad

Read More
Bradford B -
May 12, 2014
See more answers
Q:

New 247.374900 running slow.

A:

Thank you for your question.

 

I am sorry you are having a problem with the mower. If you happened to hit a rock and partially sheared the flywheel key, the engine will have a lack of power.  The engine would be harder to start and may even try to rip the starter rope out of your hands. The part number for the flywheel key is 222698S  and can be ordered from the following link. Flywheel key for Engine number 128M02-0952-F1.

I found a great video that shows how to take the engine apart to access the flywheel key. Click here to watch the video.

 

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
August 13, 2013
A:

Hi Mark T. Thanks for answering the question. I purchased the flywheel key from a local repair shop for $2 and got everything but the flywheel off. I can see the Key is definitely sheared. I think I want to use a flywheel puller to get the flywheel off to replace the key, however I am not sure which puller I should use. Any suggestions?

Read More
Nevin -
August 15, 2013
A:

Using a puller is the best way to remove the flywheel. Briggs and Stratton has their own puller they offer. If you are interested in this puller, it is part number 19069 and can be ordered from the following link. Flywheel puller You may also find it locally. I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
August 16, 2013
See more answers