Model #126T02-0220-B1 BRIGGS & STRATTON Engine

  • Cylinder Assembly
    3 Results
  • Crankshaft Assembly
    3 Results
  • Crankcase Assembly
    3 Results
  • Carburetor Assembly
    3 Results
  • Air Cleaner Assembly
    3 Results
  • Governor Assembly
    3 Results
  • Muffler & Fuel Tank Assembly
    3 Results
  • Blower Housing Assembly
    3 Results
  • Starter Assembly
    3 Results
  • Engnie Gasket Set
    3 Results
  • Carburetor Overhaul Kit
    3 Results
Find part by diagram >

Question and Answers

Q:

Need to repair a ring set for my Toro brand lawn mower. However I can't get the engine apart completely. Model #126T02-0220-B1.

A:

Hi Maggie, You can also try our Parts Direct Team at 800-252-1698 or you could visit our website PartsDirect.com. I attached the link below. I hope this helps!

Read More
Dezeray S -
June 16, 2010
A:

Thank you so very much S. Dezeray :)

Read More
Maggie -
June 16, 2010
A:

To replace the rings, you have to remove the piston from the engine.

To remove the piston, remove the head and the oil sump (pan).

Remove the rod bolts from the rod and remove the rod cap. Push the piston up and move the rod over so it clears the crankshaft. Remove the piston by pulling it down through the block or pushing it up and remove it from the top of the block.

When you install the new rings install the piston back in the block from the top.

Read More
Jimmy K -
Sears Technician
June 17, 2010
A:

THANK YOU SOOOOOO MUCH Jimmy K :) The parts website didn't help unfortunately so thank you for your suggestion...I will try that!

Read More
Maggie -
June 17, 2010
See more answers