Model #1212 WEEDEATER Line Trimmers/Weedwackers, Electric

  • Trimmer
    3 Results
Find part by diagram >

Question and Answers

Q:

replacement gears for 12 1/2 planer - model # 351.233831 351233831 Craftsman 12-1/2

Q:

how are the wires hook up to the power switch? 351233831 Craftsman 12-1/2

A:

Connect the two black wires on side of the switch and connect the two white wires on the otherside of the switch. When the switch is turned on, it should make the two black wires connect and it should make the two white wires connect and complete the path of voltage and neutral to the motor. If you have an Ohm meter, before connecting the wires to the new switch, place the two Ohm meter leads across the two terminals on one side of the switch and it should measure continuity with the switch flipped to the On position. The Ohm meter should show open ( or no continuity) when the switch is in the Off postion. The same applies to the other two terminals on the other side of the switch. This is a sure way to know if the two terminals on each side make and break when flipped to On and Off. 

Read More
Joey S -
Sears Technician
March 30, 2015
Q:

Craftsman 12 amp 12-1/2'' Bench Planer (21758) went to change blades and bolts stripped

A:

 Thank you for choosing Sears Parts Direct. I will be more than happy to help with your bench planer. In order to find the replacement bolts we will need the complete model number directly off the label or plate witch will be in the format of three numbers a decimal point and more numbers afterwards.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
February 26, 2015