Model #120 WAGNER Power sprayer

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

interior lights Kenmore Refrigerator

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you.  I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

It sounds like it could be the light switch is not making a proper connection to have the lights come on right away. This switch is the plunger at the top of the fridge when you open the door. I would recommend on replacing this part and seeing if it solves your issue.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. If you have any further questions or concerns, you will have to post a new question. Again, thank you for choosing SearsPartsDirect.com.
 

Read More
Samantha A -
Sears Technician
September 30, 2014
A:

Samantha A. I appreciate your help but I don't believe that is the problem because the two lights in the fridge and the one in the freezer are on separate switches and both flicker. That would mean both switches went bad at the same time, the switch on the freezer door and the switch on the fridge door.

Read More
Richard -
September 30, 2014
A:

Was this problem resolved? I just began to experience the same issue. The two lights in the fridge and the one in the freezer are flickering like a strobe light.

Read More
Ed -
March 02, 2015
A:

Ed, my problem has not been resolved and no one seems to have an answer. Went to parts dept. and sales at store and no one had an answer.

Read More
Richard -
March 02, 2015
A:

Im having the same issues. Our fridge is barely over a year old. the freezer and fridge lights flicker when either door is open. must be a factory defect that needs to be addressed. Please help SEARS! If either Ed or Richard comes up with a solution please mail me at Anthony.r.froid@lmco.com and ill post on here if I figure it out. I called sears and they want to charge me a service fee to come look at it. Again its barely 1 year old. Very disappointed with sears.

Read More
tony -
May 06, 2015
A:

the lights have to be fine; someone said it may be the door switch but im not really wanting to start spending more money swapping parts until im fairly certain the cause. SEARS help US!

Read More
tony -
May 06, 2015
A:

This is the same exact problem we are having with our refrigerator. Our model # is 10651122210 and we've owned it for less than 2 years. It was not an expensive refrigerator and now Sears says they will come to our home and fix it for $100 plus parts. Really? As the post above says I'm disappointed with Sears and really have no desire spending more for the refrigerator than the original cost. My family grew up with Sears appliances but I can't imagine purchasing another.

Read More
Paul -
May 20, 2015
A:

Paul---I spoke with sears customer solutions team and was given zero solutions. they basically said fix it myself or pay them to come out. I will keep researching for a fix. someone told me it could be a short but if that was the case the blinking would be inconsistent; as of now it only blinks when the door is open. I will keep posting on here until I get a fix and it has to be fixed. when the kids open up the door when the kitchen is dark it looks like I'm running a disco club (LOL). it appears this is a manufacturing defect; I've noticed many online appliance fix blogs that people with this fridge are having same issue. good luck.

Read More
tony -
May 22, 2015
A:

Paul---I spoke with sears customer solutions team and was given zero solutions. they basically said fix it myself or pay them to come out. I will keep researching for a fix. someone told me it could be a short but if that was the case the blinking would be inconsistent; as of now it only blinks when the door is open. I will keep posting on here until I get a fix and it has to be fixed. when the kids open up the door when the kitchen is dark it looks like I'm running a disco club (LOL). it appears this is a manufacturing defect; I've noticed many online appliance fix blogs that people with this fridge are having same issue. good luck.

Read More
tony -
May 22, 2015
A:

I had the conversation with the people at the outlet store where I purchased the Fridge. This is not a switch problem.

Read More
Kenneth -
June 03, 2015
See more answers
Q:

Dishwasher won't wash 665.13032K113

A:

Thank you for your inquiry on your Kenmore Dishwasher, Model: 665.13032K113. From reviewing the details on your model,from the description of the problem I suspect the diverter motor is the problem. The control powers the diverter but I would suspect the diverter motor over the control. The diverter valve should have two light blue wires attached and is powered by 120 volts from the control. I would first suggest you use a meter to check resistance across the diverter motor. An open circuit would indicate the diverter is bad. Remember to turn the power off first.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dishwasher to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 19, 2015
A:

I have a similar situation....Top rack dishware will not wash, not sure if the washer arms are circulating. Dishwasher soap dispenser always has dish soap in it, never fully cleared out. Any thoughts?

Read More
Matt -
January 24, 2016
A:

I have a similar situation....Top rack dishware will not wash, not sure if the washer arms are circulating. Dishwasher soap dispenser always has dish soap in it, never fully cleared out. Any thoughts?

Read More
Matt -
January 24, 2016
See more answers
Q:

diagnosis help needed. GCG1580L0SS Ge Compactor

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your compactor is not working properly.

 
MOTOR START WINDINGS

 1. Remove the RED and YELLOW wires from the directional switch.
 2. Connect an ohmmeter to th e RED and YELLOW wires.
An accurate ohmmeter should read about 3.4-4. 6 ohms. If the ohmmeter shows an open circuit. The start windings are open and the motor must be replaced, or the YELLOW or RED wire is broken or disconnected at the motor.

Unit making humming noise:
  • Mechanical jam
  • Start winding not energized
  •  Winding open
  •  Motor centrifugal switch contacts open
  • Run winding open
1. Remove the blue wire from the start switch, and the blue wires from the Top limit switch and directional switch.
 
2. Connect an ohmmeter to the blue wire and the neutral side of the
 power cord. 
3. An accurate ohmmeter should read about 1.2-1.6 ohms.

Motor Centrifugal switch:
1. Disconnect the wires from the motor centrifugal switch.
2. Connect an ohmmeter to terminals.
3. The ohmmeter should read 1 ohm or less. If circuit is open, motor switch is stuck or burned, motor must be replaced.



Jammed Ram:
1. Check for 120 Volts at the outlet.
2. If drawer is open, push in on the drawer.
3. If ram does not come up, unplug the unit. 
 1) Open motor rear cover plate.
 2) Rotate the motor shaft in the counter- clockwise direction using 1/4" hex 
 socket screw key, make the Ram go up

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 06, 2015
A:

My ram is stuck in the down position and I can not put the drawer in. I read the above solution but can you tell me how to rotate the motor shaft? Is the socket screw key on the top of the motor or under it?

Read More
Eimee -
January 23, 2016
See more answers

Top Parts