Model #11A-54MB029 MTD Walk Behind Lawnmower, Gas

  • Lawn Mower
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I raise the idle on my mower?

A:

If any adjustments are needed on the MTD lawnmower it should be covered in the owners manual. An expert will research this information for your specific model and respond within two business days .

Read More
Anna T -
August 12, 2012
A:

Thank you for your question.

I will be happy to assist you. I posted an image below that shows how to adjust the engine speed. Click on the image to enlarge it. I recommend using a tachometer when adjusting the speed. The speed should be set at 3250.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 14, 2012
A:

Can you post this image again?

Read More
George Sippola -
March 19, 2013
A:

George Sippola, I will be happy to assist you. For some reason the images are not enlarging as they should. I reposted the image below. If you need further assistance, please reply below with more details. I will be happy to assist you. Mark.

Read More
Mark T -
Sears Technician
March 22, 2013
See more answers
Q:

Where's the governor on this model? 11A-54MB029 Mtd Lawn mower

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Julio -
March 19, 2013
A:

Thank you for your question. I will be happy to assist you. I posted an image below that shows the governor on your model. Click on the image to enlarge it. If you cannot see the image, please copy and paste the following address. http://www.managemylife.com/mmh/questions/338623-whereamp-39-governor-model-11a54mb029-mtd-lawn-mowerI hope this is helpful. Please let me know if you need further assistance.  Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
March 21, 2013
See more answers