Model #1172 HOOVER Vacuum, Upright

  • Agitator, Cleaningtools
    3 Results
  • Handle
    3 Results
  • Motor Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

re-fasten rubber friction tube to metal pulley on belt sander 315.1172

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when needing to replace a part on your sander. 

I do apologize we do not have information on what adhesive to use for the rubber friction tube on the pulley. As for the pulley itself, it is no longer available due to the age of the product. You would need to locate a used part or purchase a new unit. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 19, 2015
Q:

For GMP 505-3 does flame sensor detach from wiring by pulling out of casing?

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your air conditioner/furnace and I do understand your frustration however we do not offer technical advice on heating and cooling units. Please contact a Sears Home Services specialist for more information. If you have further questions please resubmit your question for further information. I hope this information helps you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 

Read More
Sherman_G_Wallace -
Sears Technician
February 10, 2015
Q:

need the plastic switch box that holds the electrical plugs for the fan and light switches 1172 001

A:

Thank you for contacting SearsPartsDirect.com about your Frigidaire Gallery hood. I am so sorry the switch box needs to be replaced. We will be happy to help you find the part but will need some additional information to do so.

Please resubmit your question with the model number of the hood included. The model number will identify which parts fit your model. Frigidaire model numbers are normally a combination of letters and numbers and are usually about 10 characters long. It will be on a label on the hood and will also have the serial number. With that we can find the part you need. 

We look forward to your response. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
March 01, 2014

Top Parts