Model #117-052 CENTURY Welder

  • Fan Motor/hood/motor/panels
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

century model#117-052-003 117-052 Century 130 wire feed welder

A:

Thank You for choosing Sears PartsDirect.com. Glad to help. I did some research on this and I was able to locate a video that will help you. I see that .035 flux core wire can be used. If you have further questions please resubmit your question with a additional details. Thanks for choosing Sears PartsDirect.com. 
Here is a link for Sears.com that you can browse flux core wire.
 
 
 
.

Read More
Sherman_G_Wallace -
Sears Technician
February 24, 2014
A:

My husband was given a Century wire feed welder, model 117-02-001. We are looking for a manual for it. He needs to know what size & what type of wire to use with this welder. Any help is appreciated Thanks in advance for your help. Sincerely, D. Partain

Read More
Donna -
February 15, 2015
A:

I may need an "on & off switch" for my century welder 130. How do I get this?

Read More
Meryln -
May 28, 2015
See more answers
Q:

WIRE FEED 117-084-002 Century Wire feed welder

A:

Thank you for your question.

 

I am sorry you are having a problem with the welder. If the feed motor runs all the time it is usually caused by a defective trigger switch. To determine if the switch is the problem I recommend removing disconnecting the harness for the trigger. To do that you need to unplug the unit. Then remove the cover so you can access the connector for the gun. Disconnect the connector and put the cover back on. Now plug the unit in and turn it on. If the wire does not feed out, I recommend replacing the trigger. If it still feeds the wire, I suspect there is a problem with the control board. I checked and the control board is no longer available. If this is the problem, it is not repairable. If you need the trigger, it can be ordered from the following link.Replacement parts for a Century welder model 117-052.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

 

Mark. 

Read More
Mark T -
Sears Technician
October 21, 2013