Model #11653913300 KENMORE Attachments (Vacuum)

  • Power-mate
    3 Results
Find part by diagram >

Question and Answers

Q:

Power head not working 116.23913300

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your canister vacuum and I do understand your frustration. Glad to help out. I'm looking at your model number 11623913300 and powermate model 11653913300 and from your description I suspect that the powermate lead wire A is damaged. I recommend checking the connection at the bottom of wand item 14 that connects to the power as well as the handle. Here is a link that will help with troubleshooting. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 29, 2014
Q:

Is there a replacement for the powered carpet brush? 11623913300 Kenmore Vacuum

A:

I can understand your concern over wanting to obtain the replacement for your vacuum. I did some research and provided a link to a similar question and answer on our site. I hope this will give you a better idea on the next step to take until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
December 10, 2012
A:

Thank you for your question on the replacement power mate for the canister vacuum cleaner.

I will give you the illustration for the parts of the power mate. The power mate has its own model number.

If you put a 116.53913300 part number in you will be able to pull up the model parts information.

Parts illustration for model 116.53913300 .

In the parts list you will be looking at key numbers 22 thru 27 that make up the parts for the height adjuster.

If you want to repair this power mate instead of replace it then please let me know.

Replacement power mate for dirt sensor model 116.23913300 .

I hope this information will help you.

Sam A.

Read More
Sam A -
Sears Technician
December 11, 2012
See more answers
Q:

Replcaement part for kenmore Canister Vacuum 11623913300

A:

I understand that the cover being cracked can be frustrating. I did find some information for you that I am hoping will help you out. I found the parts page for the Powermate on Sears Parts Direct. I am adding the link below to help you with your question while you wait for your expert response. I do hope that this will help you out.

Read More
Marc H -
May 16, 2012
A:

Thank you for your question. I'm sorry you are having this problem with the part. The upper housing for this Canister Vacuum is # KC99RBZRZBUZ and the lower housing is # KC03RBZT2V07. They are available at http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Vacuum-Parts/Model-11653913300/0582/0640500?pathTaken=&prst=0&shdMod=11653913300&sid=MMLxexpertxmerch . I hope this will help you.

Read More
Scott D -
Sears Technician
May 18, 2012
See more answers

Top Parts