Model #11652313202 KENMORE Attachments (Vacuum)

  • Power-mate
    3 Results
Find part by diagram >

Question and Answers


What part should I replace if my Powemate is not working?


It could be one of the following failures preventing the Powermate from operating:

  • Reset button/switch
  • Wand cord
  • Bad wire connection
  • Bad hose assembly
  • Switch failure on the hose handle
  • Powermate motor

I can not recommend replacing any part with out properlly diagnosing the failure. It could be a bad reset but without physically being there to diagnose the failure I can't be certain of what has failed or where it may have a lost an electrical connection. In order to diagnose the failure will require a volt/ohm meter in order to check voltage and continuity of the electrical circuit.

I recommend taking the canister, hose assembly, wand and Powermate in for diagnosing and repair.

Read More
Joey S -
Sears Technician
October 07, 2009

Top Parts