Model #11651612001 KENMORE Attachments (Vacuum)

  • Power Mate
    3 Results
Find part by diagram >

Question and Answers

Q:

11651612001 11651612001 Kenmore Power-mate

A:

Thank you for your question. The parts for the power mate vs the vacuum can be confusing.  You can click on the highlighted links to view all the parts and the  lower wand.

 The lower wand is 4370623 and can be viewed and ordered along with the other parts at Sears Parts Direct. If further help is need, please reply.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
October 04, 2013
Q:

Kenmore vacuum beater brush problems Model# 11651612001

A:

I know that it can be very inconvenient for you not to have your vacuum working properly. While you are waiting for an expert to respond I was able to locate some great information that could possibly assist you with your issue. I have added the link below. Hope this helps!

Read More
Yadira B -
January 23, 2013
A:

I know that it can be very frustrating to have issues with your vacuum brush assembly. There are several parts that can cause this type of problem. Since you have already replace the belt and cleaned the head, I would suggest that you check the sprocket for wear and tear. This can cause the belt to slip, which will cause it to stop working. Also check the pulley on the motor first. If this is worn, it will cause the same problem. If these parts are okay, then replace the motor. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
January 23, 2013
See more answers
Q:

can i get a new upper wand for kenmore vac. mod no. 116.51612001

A:

Managemylife.com is a great place to find the answers to your appliance questions. Another awesome web page that will assist you until your expert can respond is searspartsdirect.com. I have attached the link where your power-mate vacuum attachments are diagramed and can be ordered. If you need a Sears associate to help you, the phone # is at the bottom of the page. I hope the link below willassist you.

Read More
James -
December 28, 2010
A:

Thank you for your question.

I can understand needing an upper wand for your vacuum.

The upper wand parts are listed with the vacuum model number. 116.21612001

The part number for the wand is;4370619 and you can purchase the wand from;Sears Parts Direct .

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 29, 2010
See more answers

Top Parts