Model #11650712007 KENMORE Attachments (Vacuum)

  • Power-mate
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Power Mate Powerhead Interchangeability 11650712007 Kenmore Power-mate

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the interchangeability of Kenmore powermate 11650712007 with powermate 11650812007. I will be happy to help you with this. 

In this case the two are NOT interchangeable. The part of the powermate called the swivel is the piece that attaches the powermate to the wand of the vacuum cleaner. In this case the two swivels are very different. The one for model number 11650712007 is about 2½ inches tall. The one for model 11650812007 is about 5½ inches tall. This means the powermates will not attach to the same wands. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
April 14, 2015
A:

Thank you so much! Without your help, I would have been stuck with an item that I couldn't return and would not have been able to use. I have ordered a new motor and switch from Sears Parts Direct for my powerhead since I'm not sure which has gone bad. I'm pretty sure it's the motor, but in case it's the switch it just made sense to order it, too. Thanks again!!

Read More
Molly -
April 14, 2015
See more answers
Q:

Kenmore cannister vaccuum cleaner Power Mate, Model # 11650712007. 11650712007

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

diagram for 11650712007 how to install power cord reel.

A:

Ti be sure new parts are installed properly its helpful to have good instructions. While you are waiting for an expert answer, I did manage to find a great link that provides great tips in helping you with your project. To be safe I am adding a second link in where you can enter your model number and a parts list diagram will pop up so that you know you get the correct part number. I hop my links are useful.

Read More
Joseph P. -
January 03, 2011
A:

Thank you for your question.

I can understand wanting to repair the vacuum reel cord yourself.

The canister model number is 116.20712007.

  • First_REMOVE POWER_ to the vacuum.

  • Remove the hose from the canister.

  • Lift off the dust box cover and the tool cover and pull them over backwards until the pop out of the retainer in the canister body.

  • This will expose two of the 4 screws that secure the motor canopy.

  • With the canister resting on a table a waist level with the front of the vacuum facing you reach over the canister body and place the fingers of both hands at the back of the pedal release for the reel cord.

  • You will need to pull up and forward on this pedal to snap it out of its location.

  • Once remove the other two screws will be exposed for you to know remove the motor canopy.

  • Once inside the canister motor area lift up on the reel cord and remove the wire nuts for the plug.

  • Route the cord out of the guide and remove the old reel cord from the canister.

  • Install the new reel cord and re-assemble.

I have added a couple of pictures below to help with the repair.

The part number for the reel cord is;8175265 and you can order is from;Sears Parts Direct .

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
January 05, 2011
See more answers

Top Parts