Model #1164053482 KENMORE Vacuum, Built-in

  • Vacuum Cleaner
    3 Results
  • Installation
    3 Results
Find part by diagram >

Question and Answers

Q:

replacement switch for Kenmore built in vac 116.4053482

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your vacuum. Upon researching model116.4053482; the rocker switch for this model has been discontinued and is no longer available, we do not have a substitution or replacement part that would work in place of the rocker switch for this model.

I trust this information will help you, have a great day.  

Read More
CarlosZ -
Sears Technician
February 24, 2015
Q:

Kenmore built-in vacuum cleaner. Model # 116-4053482 in-wall outlets replacements

A:

Finding replacement parts for older built in vacuums can be difficult. I did some research on the unit and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Barbara H. -
January 14, 2012
A:

Thank you for your question on the wall outlets for the central vacuum system.

Sears no longer has any of these parts but there are a couple of companies that are handling certain parts of this system.

Here are a couple of sites I found that may be able to help you.

Kenmore Central vacuum parts .

Kenmore Central vacuum hose parts .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
January 16, 2012
See more answers
Q:

can you help with wiring diagram for built in vacuum

A:

I see you need wiring instructions for the motor replacement. While you wait for the expert to review your model if you need to reference the schematics I attached the link to this model below.

Read More
Barbara H. -
July 09, 2011
A:

I was able to see a diagram and if correct the motor has two wires. A black one and a white one.

If there are only two wires then it won't matter where the black wire goes. There should be 120 volts across the two wires.

Read More
Fred M -
Sears Technician
July 11, 2011
See more answers