Model #11639612991 KENMORE Vacuum, Upright

  • Nozzle
    3 Results
  • Dust Compartment And Motor
    3 Results
  • Hose And Attachments
    3 Results
Find part by diagram >

Question and Answers

Q:

how do you reegage the height adjustment sliding bar with the adjustment below 11639612991 Kenmore Upright

Q:

AGITATOR is not correction size/part for Kenmore vacuum, can you locate the correct part?

A:

I completely understand how frustrating it can be to get a part that does not work. I was able to find some information for you that I am really hoping will assist you with the vacuum. I am adding the link below to help you with your question while you wait for your expert response. I do hope this will help you.

Read More
Marc H -
April 18, 2012
A:

Yes, I have ordered the full assembly. The problem is the length not the holders.

Read More
susie -
April 18, 2012
A:

Parts can be difficult. I hear and believe what you say even though the 8192015 agitator seems to be what you will get. I didn't find another part number or differant agitator but I did find some additional parts that may help solve the problem. The image below contains some information that may be helpful to you. The new agitator will not work with the original end cap. Try ordering a 8192018 kit. It should come with three parts. Try the following link: Agitator Kit for 8192015 Vacuum . I hope this helps. You can reply with any additional comments or questions for further assistance.

Read More
Fred M -
Sears Technician
April 21, 2012
A:

Thanks Fred for trying to head me in the right direction. The attachment is the page we found at both the local and parts supply Sears stores. The agitator still will spin rubbing a piece of plastic in the undercarriage. Neither the agitator nor the end caps cantilever out to cover the length discrepancy. The caps that came on the assembly fit the vacuum just fine. It's simply too short to operate. I will still order the kit to be sure.

Read More
susie -
April 21, 2012
A:

Thanks for the effort and feedback.

Read More
Fred M -
Sears Technician
April 23, 2012
See more answers

Top Parts