Model #1163937282 KENMORE Vacuum, Upright

  • Nozzle And Motor
    3 Results
  • Hose And Attachment
    3 Results
  • Handle And Bag Housing
    3 Results
Find part by diagram >

Question and Answers

Q:

I need a replacement brush 1163937282 Kenmore Upright

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about a brush for your Kenmore upright vacuum cleaner model 1163937282. I am so sorry the part is no longer made. This is a decision made by the manufacturer, likely due to the age of the product. I have included the link below for you to view vacuum cleaners that are currently available.


I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
May 13, 2015
Q:

How do install a belt in vacuum cleaner Model 116.3937282?

A:

Hi delsolownr, What is the brand of your vacuum?

Read More
scottm10 -
June 24, 2010
A:

View the image below for instructions on how to remove and replace the belt on your Kenmore vacuum.

Read More
Korinna S -
Sears Technician
June 28, 2010
A:

How do I change the belt on my model 1163937282

Read More
don -
March 28, 2015
See more answers
Q:

How do I get to the belt on my vacuum? 1163937282 Kenmore Upright

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you.  I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

There will usually be to plastic screws on the top of the agitator housing on the base of the vacuum, that will say belt access. Simply take a flat head screw driver, and turn the screws so that the screw is pointing up and down on both sides. Then pull the plastic agitator housing, or the top of the base of the vacuum off. Inside you will see a the roller brush, and the belt (or broken belt).

Simply take the new belt and wrap it around the silver pulley located in the back of the machine, opposite the roller brush, and wrap the other end of the belt through the roller brush. Stretch the roller brush back into the housing of the machine, and replace the top of the base of the vacuum back on the machine. You should give the belt a tug, to ensure that the brush is spinning when the belt is being pulled.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.
 
 

Read More
Samantha A -
Sears Technician
October 06, 2014

Top Parts