Model #11633912301 KENMORE Vacuum, Upright

  • Nozzle
    3 Results
  • Agitator And Endcap Assembly
    3 Results
  • Agiator Motor And Gear Assembly
    3 Results
  • Dust Compartment And Motor
    3 Results
  • Hose And Attachments
    3 Results
Find part by diagram >

Question and Answers


Kenmore Model # 11633912301 is not pulling anything in especially the carpet cycle


I know that it is very important to have the right tools for maintaining your home. While you are waiting for your expert answer, I was able to find a link that will provide some information and helpful tips on this. I hope this helps.

Read More
aashe -
January 23, 2012

If you are certain that the hose is clear, then you could have an internal clog or a problem with the agitator. A weak or failed suction motor could also cause this problem. I provided access information for this type of vacuum cleaner in the image below. You can use that information to access and check the internal components. Be sure that the vacuum cleaner is unplugged before accessing internal components.

If you need parts, you can order them from the Sears website.

If you get to a point where you need to have a service technician repair this failure, you can carry the vacuum into your nearest Sears Store or Sears Repair Center. Here is a link for the Sears Service website that has information on drop-off locations and on flat rate repair labor pricing: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 25, 2012
See more answers

Top Parts