Model #11633912300 KENMORE Vacuum, Upright

  • Nozzle
    3 Results
  • Agitator And Endcap
    3 Results
  • Agiator Motor And Gear
    3 Results
  • Dust Compartment And Motor
    3 Results
  • Hose And Attachements
    3 Results
Find part by diagram >

Question and Answers


How do I replace pedal kit on Kenmore upright vacuum model 116.33912300


Hello, I see you need a manual for your Vacuum pedal kit. While you are waiting on an expert you can to answer your question. You can visit our website. I attached the link below. Hope this helps!

Read More
Dezeray S -
July 31, 2010

Turn the vacuum so you can see the bottom of the lower plate. The axle of the right wheel goes through the pedal kit and has a push on retainer holding it.

Remove the push on retainer by prying it off with a small flat blade screwdriver. This will release the axle for the right wheel. Pull the axle out until it clears the pedal kit. Disconnect the spring on the pedal kit and slide it out the rear of the bottom housing.

Read More
Jimmy K -
Sears Technician
August 02, 2010
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show