Model #11633726202 KENMORE Vacuum, Upright

  • Nozzle
    3 Results
  • Dust Compartment And Motor
    3 Results
  • Hose And Attachments
    3 Results
Find part by diagram >

Question and Answers

Q:

Door on Kenmore Vacuum Canister will not open!!!

A:

Having a part on your vacuum cleaner not opening properly can be a hassle and I will be happy to help. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I hope my link is useful.

Read More
Joseph P. -
August 06, 2011
A:

Thank you for your question on the vacuum dirt canister.

If I understand you correctly, you are saying that you cannot get the cover of the dirt container removed to empty the dirt.

I am sure you have done this before, so I am trying to think of a reason that when you lift the handle and turn the lid counterclockwise it will not open. It is possible that there may be some grit stuck between the seat of the dirt container and the top and making it difficult to twist and unlock the cover?

Please let me know what you have found, and we can continue our troubleshooting based on that.

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
August 08, 2011
A:

Sam A, I can not lift the handle at all. The handle that has release written on it.

Read More
sherry -
August 08, 2011
A:

Thank you for the update on the vacuum dust container. This is more of a problem than I thought it would be. Perhaps the gasket on the inside docking area became dislodged and that last the dust container was put back on it got bound and you would not know until the next time you wanted to remove it. Let's try this. Lay the vacuum on its back on the floor and push down on the container while you pull up on the handle to see if you can get it to release. Please let me know if that worked, and we can continue our troubleshooting based on that. I will in the mean time try to contact the manufacture to see if there is anything else we can try. Sam A.

Read More
Sam A -
Sears Technician
August 09, 2011
See more answers

Top Parts