Model #11631109100 KENMORE Vacuum, Upright

  • Nozzle
    3 Results
  • Dust Compartment And Motor
    3 Results
  • Hose And Attachment
    3 Results
Find part by diagram >

Question and Answers


Is it easy to replace (or clean) the bearing assembly 4370532 on the roller for a Kenmore model 11631109100?


It is pretty easy to remove the front brush/roller on your vacuum.

Disconnect the vacuum from power.

Turn the vacuum over so you can see the bottom of the upright. Slide the 2 latches on the front bottom of the vacuum to unlatch the lower plate.

The plate will drop down and you can see the belt and roller. Remove the belt from the motor shaft and lift the roller out of the base.

The bearings will come out with the roller.

Read More
Jimmy K -
Sears Technician
June 11, 2009

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show