Model #11629612992 KENMORE Vacuum, Canister

  • Vacuum Cleaner
    3 Results
  • Hose And Attachments
    3 Results
  • Power Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

How to get to the screws under rewind button? 11629612992 Kenmore Canister vacuum cleaner

A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. The motor replacement for the canister vacuum is provided in the image below. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
September 12, 2013
Q:

Agitator bar keeps stopping

A:

When an appliance doesn't work properly or gives out it can be very disappointing because you don't really know what is wrong with it or you might even have to buy a whole different appliance. A suggestion I have for you while you are waiting on your response from an expert is visiting the Sears Parts Direct website. I have attached the link below if you are interested in viewing while waiting on your response from an expert. Hope this helps, good luck

Read More
Dezeray S -
July 06, 2011
A:

Thank you for your question.

I can understand wanting to have the roller brush working on your power mate.

You say that when you push the reset button it starts for a few rotations.

When you cleaned the agitator bar did you remove the bearing end caps and clean out that area also?

I would suggest removing the belt again and make sure the roller brush spins freely. If it does then you may have a problem with the motor drawing to many amps and it is tripping the circuit breaker.

With the belt removed push the circuit breaker and run the motor with out the belt to see if it will trip the circuit breaker. If it does it is either the circuit breaker or the motor.

How many times have you reset the circuit breaker? If you have done it many many times it may be failing to hold the motor amp draw.

If after these suggestions you still have a problem please reply and I will try to help your further.

I think you are going to find the problem.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 06, 2011
See more answers
Q:

Can I use Kenmore progressive canister model number 116.23512304 as a replacement for Kenmore progressive canister model number 116.29612992?

A:

It looks like the attachments and the power mate will work with either vacuum.

To be sure, try the attachments and the power mate on the 116.23512304 before discarding the 116.29612992.

Read More
Jimmy K -
Sears Technician
February 02, 2010

Top Parts