Model #11629612991 KENMORE Vacuum, Canister

  • Vacuum Clenaer
    3 Results
  • Hose And Attachments
    3 Results
  • Power Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

trying to get power section cover off 11629612991 Kenmore Cainster vacuum cleaner

A:

There's no easy way to get that cord return button off. It has to be "snapped" out of the housing. Sometimes that cord release button will break when it's being removed. Try pressing down on one side and prying the other side out to snap it out of the housing. If you break the cord release button when removing it, it will need to be replaced.

Read More
Lyle W -
Sears Technician
December 09, 2014
Q:

kenmore progressive canister vacuum not staying on! 296112991

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Joseph P. -
March 06, 2013
A:

The power cord could be causing your problem. That frayed power cord should be replaced one way or the other. Since the vacuum cleaner runs after several attempts, this seems to indicate that the rest of the components in the vacuum cleaner are probably okay.

 

The part number for the power cord reel is 8175265. You can order that parts from this page: Cord Reel 8175265 for Kenmore Progressive Vacuum Cleaner Model 116.29612991. 

 

Unplug the vacuum cleaner before accessing internal components and replacing parts.  The image below shows the basic procedure for removing the canopy of the canister to access and replace the power cord reel. You can use that procedure if you intend to fix this problem yourself.

 

If you need more help, reply with additional details and we will assist you further.

 

If you get to the point where you need to have a service technician fix this problem, you can carry the vacuum cleaner into your nearest Sears Repair Center or Sears Store. Here is a link for the Sears Service website that has information on the nearest repair facilities in your area: Sears Home Services Vacuum Cleaner Repair. 

Read More
Lyle W -
Sears Technician
March 08, 2013
A:

I should clarify my problem a little further. The motor doesn't shut off.....that continually stays on. It's the attachment with the beater bar that actually vacuums the carpet that will not spin unless I hit that reset button about 10 times. I think it needs a new reset switch. I am thinking the power cord doesn't have much to do with it since the motor stays running. Could this be the problem? thanks!

Read More
ingrid -
March 17, 2013
A:

Thanks for clarifying that problem Ingrid. You can view the parts diagram for that Power Mate portion of the vacuum cleaner on this page: Kenmore Vacuum Power Mate Model 116.59612991 Repair Parts . The overload for that beater bar motor is Key 41 on that parts drawing. You can check the wiring on that overload and the motor. If the wiring is okay, then that overload may need to be replaced. Be sure that you UNPLUG the vacuum cleaner before accessing internal components. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
March 19, 2013
See more answers
Q:

vacuum cleaner model 116.29612991

A:

Detailed instructions can really come in handy when doing some major repairs. I did some research and I was able to find a link that will provide you with some detailed instructions to guide you with your repair. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
April 03, 2012
A:

Thank you for your question on the wand parts for the vacuum cleaner.

I will give you the parts picture for the wands.

The wands that you are showing me in the picture will require you to order both the upper and lower wands.

In the image of the upper and lower wand there are very few parts that you can get.

For the lower wand you can only get the lock button kit for the whole lower wand. Key#16 in the picture.

The upper has two parts that you can get separate from the whole wand. The lock button kit and the button release for the top of the upper wand key # 4 in the picture.

If you are referring to the riveted plastic piece on the lower wand that also has the power cord. It does not come separately from the lower wand.

If you intend to change out the lock buttons, you will need to drill them out to install the replacement button kit.

Sears Parts Direct wand parts for model 116.29612991 .

Please let me know what parts your are looking for, if I have not understood your question correctly.

Sam A.

Read More
Sam A -
Sears Technician
April 05, 2012
See more answers

Top Parts