Model #11629134 KENMORE Attachments (Vacuum)

  • Power Mate
    3 Results
Find part by diagram >

Question and Answers

Q:

How to install Brush #722885 into roller. 11629134 Kenmore Powermate

A:

You may need to pull the brush back out and clean the groove out. Compressed air will work the best but if you may need to use a small screwdriver if there are any particles still in the groove. If the brush still won't slide in the groove, you can try using just a very small amount of lubricant to help it slide and this would be a last resort. Then be sure to run the unit on a surface that is not seen or maybe an outside rug. This will be in case too much lubricant was used and it may come out when first used. If you would like to have a technician make this repair, you can call 1-800-469-4663 to locate the nearest repair center. I hope this will help you.

Read More
Scott D -
Sears Technician
July 07, 2014