Model #11628812790 KENMORE Vacuum, Canister

  • Vacuum Cleaner
    3 Results
  • Hose And Attachement
    3 Results
  • Power Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

Hose Assy (P/N: 4370560) Wire Connection to Harness Switch (P/N: 4369108) 11628812790 Kenmore Canister vacuum cleaner

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the wiring on your Kenmore canister vacuum cleaner model 11628812790. I am so sorry the hose needed to be replaced. I will be happy to help you with this. I have included the image below that includes the instructions for reconnecting the wiring.

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
October 18, 2014
A:
Rachel Morgan -
Sears Technician
October 18, 2014
A:

Hello Linda, Thanks for the handle wiring diagram. It is very helpful and I will keep it for reference. However, what I am actually after is the correct electrical hook-up of the wire harness (P/N: 4370561) to the switch assy (P/N: 4369108). The switch assy has 6 electrical leads (pins/connectors) and the wiring harness is composed of 5 wires (1 black, 1 blue with a blue jumper, and 1 yellows with a yellow jumper for a total of 5 connections). From these 5 wires on the harness assy, to what pins on the 6-pin switch do they go? Because I have 6-pins on the switch and only 5 wire connections on the harness, I am left with one open pin on the switch and none of the pins on the switch are not labeled nor identified. So in order to correctly install the wire harness to the switch, which wire goes where on the switch? Do you have any info on this? Thanks.

Read More
Charles -
October 18, 2014
A:

I don't have a wiring diagram available for that Kenmore vacuum cleaner. There is a wiring diagram listed for this vacuum cleaner (part LIT4369364). You can order that wiring diagram to help you determine how to connect the wires to that switch.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
October 21, 2014
See more answers
Q:

How is the card reel button removed to access the screws necessary to change the motor relay for Model 116.28812790?

A:

I think its great that you are wanting to do some repairs on your own and I will be happy to help. I did some research and I was able to find a link that will guide you with your project. I hope this helps with your repairs, while you wait for your expert response.

Read More
Joseph P. -
July 11, 2012
A:

Thank you for your question on motor canopy removal.

You will need to use both hands and have the canister at waist level with the hose hole at your waist and with both hand and fingers over the top of the unit grasp the cord reel button and pull towards you and up to compress the plastic retainer tabs to release the button.

There will be a button coil return spring that will with need to put back after you are done with the repair. It lines up on a post on the button and sits in a depression on the motor canopy.

Once you have the button removed you will be able to remove all the screws that secure the motor canopy.

The relay will be the black box in the bottom of the canister next to the motor.

Please let me know how it went and if you need more help I will be glad to assist you further.

Sam A.

Read More
Sam A -
Sears Technician
July 16, 2012
See more answers
Q:

Can I use part number 50558 as a substituted bag for part 50557, on my Kenmore canister vac 11628812790?

A:

Hi, I see you want to know if a vacuum bag will fix on another one. You can visit our PartsDirect.com website. I attached the link below. Hope this helps!

Read More
Dezeray S -
July 14, 2010
A:

? No, wondering, instead, if i can use the cheaper bag without causing a problem for the vacuum or otherwise. The recommended bag costs too much. The recommended bag is part Number: 50557. I want to know if it would be ok to use part Number 50558 (which is way cheaper) instead. Thx

Read More
motokatusa -
July 14, 2010
A:

Part 50557 is recommended by the manufacturer. If the bag doesn't have the proper fitting, it will not collect the debris as it should. $5 a piece for a vacuum bag is pretty expensive. I did a little research for you and found that, www.vacuumsinc.com has a package of 10 bags for $9.99. I provided you with a link below.

Vacuum bags .

These bags are designed to fit all vacuum models that use the 50558 and 50557, since we don't have access to all the parts here, its hard to be able to compare the two bags. It's possible the 50558 is the same bag, with the only difference being that it comes in a pack of 8.

Read More
Korinna S -
Sears Technician
July 15, 2010
See more answers

Top Parts