Model #1162645086 KENMORE Vacuum, Canister

  • Base Assembly
    3 Results
  • Hose Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Vacuum Model 1162645086

A:

I think its great that you are wanting to do some repairs on your own and I will be happy to help. I did some research and I was able to find a link that will guide you with your project. I hope this helps with your repairs while you wait for your expert response.

Read More
Joseph P. -
January 05, 2013
A:

Thank you for your question.



I am sorry you are having a problem with the vacuum. I will be happy to assist you on replacing the power cord. I posted a few images below that will aid in replacing the cord. Just click on them to enlarge. Once opened follow the instructions. Please be sure the cord is not plugged in when you are servicing the vacuum.

I hope this is helpful. Let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 08, 2013
A:

Thank you for your question.



I am sorry you are having a problem with the vacuum. I will be happy to assist you on replacing the power cord. I posted a few images below that will aid in replacing the cord. Just click on them to enlarge. Once opened follow the instructions. Please be sure the cord is not plugged in when you are servicing the vacuum.

I hope this is helpful. Let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 08, 2013
A:

Here are the images.

Read More
Mark T -
Sears Technician
January 08, 2013
A:

Thanks so much. The last images were very helpful, and I was able finally to pry the unit apart and put it back together again! Thanks again.

Read More
joberdorf@comcast.net -
January 10, 2013
See more answers
Q:

Hose for model#1165418582

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
October 31, 2011
A:

I am sorry to tell you that we don't have a substitute hose for your vacuum. Since vacuum hoses are made for specific models, I don't think you will find a hose anywhere.

I suggest you go to Sears.com and shop for a new vacuum.

Read More
Jimmy K -
Sears Technician
November 01, 2011
See more answers
Q:

Kenmore Vacumm - Model 11645086

A:

I know that it can be very frustrating to have your equipment not work properly. While you are waiting for your expert answer, I have found a link that maybe helpful with the issue. However, I looked up the model number you gave, and it is not vaild. I would suggest that you double check it, and reply. This will make it easier for us to give you a more detailed answer. I hope this helps.

Read More
aashe -
August 30, 2011
A:

It is correct. This vacuum is about 35 yrs. old.

Read More
Katie -
August 31, 2011
A:

Thank you for the question on the vacuum cleaner handle switch.

Please verify the model number you have given me it looks like it is missing a number.

I think this is an old canister vacuum with the rocker switch on the hose handle.

I found a 116.2045080 series that may similar to it.

Please reply with a verified model number.

Sam A.

Read More
Sam A -
Sears Technician
September 01, 2011
A:

Sorry. I know I typed in the missing (2) digits, but apparently they didn't enter. The complete number is: 1162645086

Read More
Katie -
September 01, 2011
A:

Thank you for the model number on the vacuum. Yes the model I picked is the same style you have. The bottom plastic sleeve on the nozzle and the top half snap together at the seam line. You are right in that there are no screws that hold it together. If you look close at the seam line you can carefully pry the two halves apart. If you look at the image below you will see some dark areas on 8 and 21 where they lock together over 7 in the picture. I hope this will help. Sam A.

Read More
Sam A -
Sears Technician
September 01, 2011
A:

Thanks Sam! I think I can figure it out, but I don't see a picture.

Read More
Katie -
September 01, 2011
A:

I am sorry I did not check to see if the picture loaded on the file. I checked to make sure it loaded this time. Look at the bottom cover in the picture and you will see dark areas where the tab locks are. Sam A.

Read More
Sam A -
Sears Technician
September 02, 2011
A:

Thanks Sam! I'll see what I can do this weekend.

Read More
Katie -
September 02, 2011
See more answers

Top Parts