Model #11625914507 KENMORE Vacuum, Canister

  • Canister
    3 Results
  • Attachments
    3 Results
  • Hose
    3 Results
  • Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

Need Help to Replace Swivel on Kenmore Canister Vacuum 25914

A:

Appliances can exasperate us as we try to find resolutions to these issues. I understand the importance of having the proper instruction to repair an appliance. I have taken taken the time to research on the Manage My Life website and have located a few links that you may find useful. While you are waiting for a detailed reply from an expert I have attached the links below.

Read More
Priscilla V -
July 25, 2011
A:

Thanks for responding but the swivel I am referring to is in the Power Mate, or the large attachment used to vacuum the floor.

Read More
Suebac -
July 25, 2011
A:

Thank you for your question.

I am sorry that the swivel on your power mate has broken.

I will be glad to help you remove and install the new swivel.

First turn the power mate over and locate the two screws on the underside near the wheels. Reference the second image below.

Once removed, you can turn the power mate over and remove the top cover.

Using the image below locate the two screws that hold the swivel retainer and remove.

Remove the two screws on the back side of the tube that has broken off and remove the wires harness plug.

(Note the location of the wire routing).

Make sure you install the two swivel seals on either side of the pivot area.

On some model you may have to remove the height adjuster to get the swivel out.

But since you are changing the swivel and not the wire harness you should not have to do that.

Remove and install any parts off the old swivel and install onto the new one.

I hope this will help.

If you need more help please reply and I will be happy to help you.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 26, 2011
A:

Thank you so much for the instructions regarding how to replace the swivel on my vacuum cleaner as I had no idea how to proceed otherwise. Once I receive the part I will try this repair myself and advise as to how it goes. Again, thank you very, very much!

Read More
Suebac -
July 26, 2011
A:

I am so happy I was able to replace the broken swivel on my vacuum cleaner but could never have done it without the information you provided. It certainly wasn�t easy and somewhat confusing once I had it all apart, but I was able to do it. The only casualty was that I broke one of the swivel cap retainer tabs that hold the swivel assembly in. While it doesn�t seem like it should pose much a problem I did want to check with the expert for your opinion. Please let me know if that will affect its operation or anything else in the future. This site is an excellent resource and your kind and valuable assistance is greatly appreciated!

Read More
Suebac -
July 31, 2011
A:

Thank you for the update and congratulations on your achievement. It�s like anything else you learn, once you know how it�s not that difficult. The broken tab certainly is not a show stopper. It should be fine as long has you were able to use both screws to hold down the retainer. Sam A.

Read More
Sam A -
Sears Technician
August 02, 2011
A:

I am trying to use Sam A's directions. I have the cover off, and am having trouble taking parts off of the original part to change them to the new part. (Thanks for the heads up about "make sure you install the two swivel seals on either side of the pivot area." because I totally missed that they were in the package. They were not in a package of their own...didn't even see them, but I have them now. The pictures you posted are really small and blur when blown up. Do you have any tips, such as how to slide or twist or fiddle with the parts that have to be taken off and put on new part. I am hoping you or someone does, because I have taken screws off and am trying to carefully pull/slide/or lift and have not accomplished the removal. Thanks.

Read More
Nada -
July 11, 2015
See more answers
Q:

Vacuum motor 11625914507

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your vacuum. Upon researching model 11625914507; the motor for this model includes the motor brushes, the motor brushes are not sold separately. I have posted a link of the motor to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
May 21, 2015
Q:

How to replace connector pipe 11625914507 Kenmore Canister vac

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your vacuum and I do understand your frustration. Glad to help out. I'm looking at your model number 11625914507 and here is a link for some videos that will help with repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 17, 2014
A:
Sherman_G_Wallace -
Sears Technician
December 17, 2014
See more answers

Top Parts