Model #11625513500 KENMORE Vacuum, Canister

  • Canopy/body/motor
    3 Results
  • Attachments
    3 Results
  • Hose
    3 Results
  • Cord Reel
    3 Results
  • Power-mate
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I replace a connection pipe part #KC92PBZTZV06 on a Sears vacuum cleaner model 116.25513500?

A:

To remove the hose from this connection pipe, you will need to release the collar from the hose and then disconnect the hose wiring and pull off the hose. The first image below shows the basic procedure. The second image shows the tabs that are on each side of the connection pipe. The third image shows the tab on the collar that slides into the tab on the base of the connection pipe. The plastic seams on the collar coincide with the location of the tabs. You will need to twist the collar to release these tabs and then you can pull the collar back down the hose as shown in the third image to access the hose wiring. This should help you replace the part.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
November 23, 2009
A:

how do I replace just the wand swivel piece?

Read More
kris -
January 02, 2016
A:

how do I replace just the wand swivel piece?

Read More
kris -
January 02, 2016
See more answers
Q:

Selection switch 116.25513500

Q:

Vac motor replacement 11625513500 Kenmore Canister vac

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to replace motor on your vacuum.



You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 






Read More
Natasha12 -
Sears Technician
January 22, 2015

Top Parts