Model #1162501290 KENMORE Vacuum, Canister

  • Canister
    3 Results
  • Hose And Attachment
    3 Results
  • Power-mate
    3 Results
  • Power Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

how to remove cover to access cord reel 1162501290 Kenmore Canister vacuum 11626512690 Kenmore Vacuum cleaner

Q:

how to remove cover to access cord reel 1162501290 Kenmore Canister vacuum

A:

I know that it can be very frustrating to replace parts on your vacuum. The image below will provide the directions on how to do this. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
October 27, 2013
Q:

Kenmore vac motor relay, difficulty mounting

A:

Having a properly working vacuum is very important. I did some research on the model number and part number but was not able to find a solution. Your expert will be able to help answer your question. It may take two business days. I do hope that everything works out for you.

Read More
Marc -
March 13, 2013
A:

That is the correct part number for the motor relay based on your model number 116.2501290. That motor relay part 4152600 should look like the one shown in the image below. I am not aware of any problems that have been encountered when replacing the motor relay on that vacuum cleaner when you have the correct part. If you have the correct part, then you may be able to install the relay with just one screw that is tightened properly.

 

If you need more help, reply with additional details and we will assist you further. 

Read More
Lyle W -
Sears Technician
March 14, 2013
A:

Marc & Lyle, thanks for answering. I will try to add photos. I've contacted Sears, and will see what they have to say. The part that came was written to be different than the original, and it is. I may have to rely on only one screw. Thanks for the help, Randy

Read More
Randy -
March 15, 2013
A:

Thanks for posting the pictures. It does appear that you have the correct replacement relay based on the photos. One screw should hold that relay in place since both screws won't fit.

Read More
Lyle W -
Sears Technician
March 16, 2013
See more answers

Top Parts