Model #1162491290 KENMORE Vacuum, Canister

  • Vacuum Cleaner
    3 Results
  • Hose And Attachment
    3 Results
  • Power Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

Swivl-hose changeout 1162491290 Kenmore Vacuum cleaner

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to replace the swivel on your vacuum hose. I did look into the model number you have provided, and I have found information to assist you. 

I have attached the instructions to help you replace the swivel.

Let me know if this helps. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
July 24, 2014
A:

The instructions you attached are so small cannot read. Tried enlarging, but then they are blurry and cannot read. Thanks

Read More
Gary -
July 24, 2014
A:
Natasha12 -
Sears Technician
July 25, 2014
See more answers
Q:

We need a belt that goes with this model for the Powermate attachment that drives the brushes. It is 5/16" wide and is ribbed. Can you get this for me? 1162491290 Kenmore Vacuum cleaner

A:

Thank you for contacting SearsPartsDirect.com with your question about your Kemore Vacuum Cleaner. I will be happy to help you with the belt for the powermate. I have included the link for you to order the part.

Powermate Belt for Kenmore Vacuum Cleaner 1162491290.

I hope this answers your question. If you need further assistance, please resubmit yuour question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
February 19, 2014
Q:

Kenmore canister vacuum p/n 1162491290. How ican remove the wheel item #27 from the base?

A:

I'm sorry to hear that you are having some difficulties with your Kenmore Canister Vacuum. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. You can also continue the exixting thread with Sam. Click on the grey reply box to do so from your original question..

Read More
James -
February 07, 2012
A:

Thank you for your question on the removal of the swivel wheel on the base of the canister.

This swivel is pressed in place at the factory.

To remove it you will need a couple of large flat bladed screw drivers and slide them up under the swivel on both sides and pry to pop the wheel out of the base. It will take some prying pressure to get it to pop out.

It will usually break off the plastic tab on the wheel swivel so you will not be able to put that one back in and it will require a new swivel wheel assembly.

I hope this will help you with the removal of the wheel.

Sam A.

Read More
Sam A -
Sears Technician
February 08, 2012
A:

Sam, thx 4 taking time to answer my question. The model that I have referenced too locks the swivel wheel using a plug with molded tabs and a pin in the center of the plug, which prevents tabs to collapse toward the center. I used 5/32 dia x 1� long flat punch and easily pushed out the pin from inside the canister. It came out at the wheel. With pin out of the way I pry out the wheel out using small crowbar. The wheel pop out scratched but reusable. Thank Again thx for the advise

Read More
John -
February 08, 2012
A:

Thank you John for the update. I didn't remember that being the case with this wheel but I am glad you told me and hopefully that solved the problem and I can put that in the file for future use. Thanks again John. Sam A.

Read More
Sam A -
Sears Technician
February 09, 2012
See more answers

Top Parts